Interaction of slip‐ and flame‐spray coated carbon‐bonded alumina filters with steel melts |
| |
| Authors: | Patrick Gehre Anne Schmidt Steffen Dudczig Jana Hubálková Christos G. Aneziris Nick Child Ian Delaney Gilbert Rancoule Duane DeBastiani |
| |
| Affiliation: | 1. Institute of Ceramic, Glass and Construction Materials, Technische Universit?t Bergakademie Freiberg, Freiberg, Saxony, Germany;2. Foseco International Ltd., Tamworth, Staffordshire, England;3. Foseco R&D Centre, Enschede, Overijssel, The Netherlands;4. Vesuvius, Pittsburgh, Pennsylvania |
| |
| Abstract: | Ceramic foam filters play an essential role in the quest for cleanliness of cast steel parts as they facilitate turbulence reduction during mold filling as well as removal of nonmetallic inclusions. A coating on these filters is able to increase their strength and filtration efficiency by improving the adhesion of inclusions to the filter strands. In this study, Al2O3‐C filters were coated with an alumina slip via slip and flame spraying. The phase composition and the microstructure of the coatings were investigated before and after immersion into molten steel contained in a metal casting simulator. After contact with molten steel, Al2O3‐C reference filter shows intense decarburization which often influence the quality of cast steel parts due to formation of gas bubbles. Slip‐sprayed alumina coatings on such a filter promote the deposition of inclusions due to formation of a vitreous alumina layer but will also cause gas bubble formation as they exhibit a high porosity. Flame‐spray coatings have low porosity and hence, prevent formation of gas bubbles. Furthermore, they showed the highest reactivity toward the steel melt and hence, are recommended for filtration of cast products with a high demand on cleanliness. |
| |
| Keywords: | alumina coatings porous materials refractories steel |
|
|
