| 微波干燥湿法炼锌中和铁渣实验研究 |
| |
| 引用本文： | 马爱元,郑雪梅,袁杰. 微波干燥湿法炼锌中和铁渣实验研究[J]. 化工进展, 2021, 40(2): 1077-1084. DOI: 10.16085/j.issn.1000-6613.2020-1550 |
| |
| 作者姓名： | 马爱元 郑雪梅 袁杰 |
| |
| 作者单位： | 六盘水师范学院化学与材料工程学院,贵州六盘水553004;贵州省煤炭洁净利用重点实验室,贵州六盘水553004;六盘水师范学院化学与材料工程学院,贵州六盘水553004;贵州省煤炭洁净利用重点实验室,贵州六盘水553004;六盘水师范学院化学与材料工程学院,贵州六盘水553004;贵州省煤炭洁净利用重点实验室,贵州六盘水553004 |
| |
| 基金项目： | 贵州省科技厅技术基金(黔科合基础[2019]1444);贵州省教育厅科技拔尖人才支持项目(黔教合KY字[2018]066);六盘水市科技计划(52020-2018-0304);六盘水师范学院科技创新团队项目(LPSSYKJTD201801);六盘水师范学院重点学科建设项目(LPSSYZDPYXK201708);贵州省科技平台及人才计划(黔科合平台人才[2020]2001) |
| |
| 摘 要： | 湿法炼锌产出的中和沉铁渣作为重要的二次资源，含有大量的铁、锰、锌等有价金属，具有较高的综合回收利用价值。回收有价金属前需对中和铁渣进行脱水预处理，基于回转窑干燥法存在干燥时间长、干燥效率低、二次污染等问题，本文开展了微波干燥湿法炼锌中和铁渣实验研究，考察了微波功率、物料量对中和铁渣温升行为的影响，表明微波干燥湿法炼锌中和铁渣是可行的；实验考察了微波功率、物料量和干燥时间对中和铁渣脱水率的影响。研究结果表明：在一定程度上，中和铁渣脱水率与干燥时间和微波功率成正比，与物料量成反比。实验控制微波功率为1000W、物料量为50g、微波干燥时间为9min时，中和铁渣脱水率达98.55 %；X射线衍射、红外光谱分析展示微波干燥中和铁渣自由水脱除较为完全，但仍含有部分的结晶水；扫描电镜分析显示微波干燥较常规干燥更为均匀；与常规干燥工艺相比，微波干燥具有干燥时间短、水脱除率高、干燥均匀、清洁无污染等优势。
|
| 关 键 词： | 中和铁渣 微波 干燥 脱水率 |
| 收稿时间： | 2020-08-05 |
Experimental study on the microwave drying of neutralization iron slag from zinc hydrometallurgy |
| |
| Aiyuan MA,Xuemei ZHENG,Jie YUAN. Experimental study on the microwave drying of neutralization iron slag from zinc hydrometallurgy[J]. Chemical Industry and Engineering Progress, 2021, 40(2): 1077-1084. DOI: 10.16085/j.issn.1000-6613.2020-1550 |
| |
| Authors: | Aiyuan MA Xuemei ZHENG Jie YUAN |
| |
| Affiliation: | 1.School of Chemistry and Materials Engineering, Liupanshui Normol University, Liupanshui 553004, Guizhou, China
2.Guizhou Provincial Key Laboratory of Coal Clean Utilization, Liupanshui 553004, Guizhou, China |
| |
| Abstract: | As an important secondary resource, neutralizing iron slag in zinc hydrometallurgy contains a lot of valuable metals such as iron, ferrum and zinc, which has a high value of comprehensive recovery and utilization. Before the recovery of valuable metals, the neutralizing iron slag needs to be dehydrated and pretreated. Based on the problems of long drying time, low drying efficiency and secondary pollution in the rotary kiln drying method, the experimental research on the neutralizing iron slag in zinc hydrometallurgy by microwave drying was carried out. The experimental study on the influence of microwave power and material quantity on the temperature rise behavior of neutralizing iron slag showed that it is feasible to dry the neutralizing iron slag in zinc hydrometallurgy by microwave drying. The effects of microwave power, material quantity and drying time on the dehydration rate of neutralizing iron slag were investigated. The results showed that, to some extent, the dehydration rate of neutralizing iron slag is directly proportional to drying time and microwave power, and inversely proportional to the amount of material. When the microwave power is 1000W, the material quantity is 50g and the microwave drying time is 9min, the dehydration rate of neutralizing iron slag is 98.55%. XRD and FTIR analysis showed that the iron slag was completely removed in microwave drying. SEM analysis showed that microwave drying was more uniform than conventional drying. Compared with the conventional drying process, microwave drying has the advantages of short drying time, high water removal rate, drying uniform, clean and pollution-free. |
| |
| Keywords: | neutralization iron slag microwave drying dehydration rate |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《化工进展》浏览原始摘要信息 |
|
点击此处可从《化工进展》下载免费的PDF全文 |
|
