| 提高20Cr2Ni4A钢齿轮渗碳淬火硬度的试验研究 |
| |
| 引用本文： | 赵少甫,许鸿翔,王红伟,郭敬强,李子岩,陈岩. 提高20Cr2Ni4A钢齿轮渗碳淬火硬度的试验研究[J]. 金属热处理, 2021, 46(7): 120-125. DOI: 10.13251/j.issn.0254-6051.2021.07.023 |
| |
| 作者姓名： | 赵少甫 许鸿翔 王红伟 郭敬强 李子岩 陈岩 |
| |
| 作者单位： | 郑州机械研究所有限公司,河南 郑州 450001 |
| |
| 基金项目： | 国家重点研发计划(2019YFB2006403) |
| |
| 摘 要： | 针对20Cr2Ni4A钢制造的中大型齿轮在不允许冷处理的条件下渗碳淬火硬度偏低的问题,通过对渗碳淬火碳势、中间高温回火工艺、淬火温度的优化,在不冷处理的情况下使齿轮硬度提高了2 HRC以上至58～61 HRC,显微组织良好,达到了预期目的.试验发现,该材料渗碳后经过高温回火再重新加热淬火时,为了提高表面及次表面硬度,渗...
|
| 关 键 词： | 20Cr2Ni4A钢 渗碳淬火 硬度 残留奥氏体 齿轮 |
| 收稿时间： | 2021-03-26 |
Experimental study on improving carburizing and quenching hardness of gear made of 20 Cr2 Ni4 A steel |
| |
| Zhao Shaofu,Xu Hongxiang,Wang Hongwei,Guo Jingqiang,Li Ziyan,Chen Yan. Experimental study on improving carburizing and quenching hardness of gear made of 20 Cr2 Ni4 A steel[J]. Heat Treatment of Metals, 2021, 46(7): 120-125. DOI: 10.13251/j.issn.0254-6051.2021.07.023 |
| |
| Authors: | Zhao Shaofu Xu Hongxiang Wang Hongwei Guo Jingqiang Li Ziyan Chen Yan |
| |
| Affiliation: | Zhengzhou Research Institute of Mechanical Engineering Co., Ltd., Zhengzhou Henan 450001, China |
| |
| Abstract: | In view of the insufficient hardness of large gears made of 20Cr2Ni4A steel after carburizing and quenching but not allowing refrigerating treatment, the hardness of the gear is increased by more than 2 HRC to 58-61 HRC free of refrigerating treatment, through the optimization of carburizing and quenching carbon potential, intermediate high temperature tempering process and quenching temperature, meantime, the good microstructure is obtained. It is found that in order to improve the surface and subsurface hardness, the carbon potential should be increased as high as possible under the premise that the carbides do not exceed the standard, when the steel is hardened by reheating after carburizing and high temperature tempering. Repeated tests show that the intermediate high temperature tempering can also reduce the carbon content in a certain depth of the carburized layer, which can affect the carburizing and quenching hardness. Therefore, both insufficient tempering and over tempering should be prevented, especially the latter. If the tempering times are too many and the each time is too long, the hardness will be lower after quenching. |
| |
| Keywords: | 20Cr2Ni4A steel carburizing and quenching hardness retained austenite gear |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载全文 |
|
