| 功能化炭基磁性介孔材料的制备及其对铀的吸附性能 |
| |
| 引用本文： | 彭国文,肖方竹,孙世雄,张志军,胡南,王晓亮,丁德馨. 功能化炭基磁性介孔材料的制备及其对铀的吸附性能[J]. 原子能科学技术, 2015, 49(12): 2138-2144. DOI: 10.7538/yzk.2015.49.12.2138 |
| |
| 作者姓名： | 彭国文 肖方竹 孙世雄 张志军 胡南 王晓亮 丁德馨 |
| |
| 作者单位： | 1.南华大学 化学化工学院，湖南 衡阳421001；2.南华大学 铀矿冶生物技术国防重点学科实验室，湖南 衡阳421001；3.青海金瑞矿业发展股份有限公司，青海 西宁810008 |
| |
| 摘 要： | 以介孔氧化硅SBA-15为模板,通过纳米浇筑法在模板孔道中引入不同质量的铁源和炭源作为前驱物,经过原位聚合反应,再使用[3-(三甲氧基硅烷)丙基]脲(UPTS)和氨丙基三乙氧基硅烷(APS)有机试剂对其表面进行后嫁接改性,得到介孔结构规整有序的功能化炭基磁性介孔材料(FCMMC)。并通过红外光谱(FT-IR)、N2吸附-脱附分别表征了FCMMC的结构。考察了溶液pH值、铀初始浓度、吸附剂用量和吸附时间等因素对FCMMC吸附铀的影响。结果表明:炭基和铁基均被负载在介孔氧化硅基体上,FCMMC具有较高的比表面积和较窄的孔径分布。FCMMC吸附铀的最佳条件为:pH=6.0、铀初始浓度25mg/L、FCMMC用量40mg、吸附时间1.0h。对吸附动力学模型和吸附等温模型进行了分析,FCMMC对铀的吸附动力学过程符合准二级动力学模型,吸附等温线符合Langmuir等温线模型,最大理论吸附量为128.69mg/g。同时,使用3种不同的解吸剂对FCMMC解吸再生8次后,其对铀的吸附率均在80%以上,说明FCMMC具有良好的再生性能。
|
| 关 键 词： | 炭基磁性介孔材料 功能化 铀 吸附性能 再生性能 |
Preparation of Functionalized Carbonaceous Magnetic Mesoporous Composite and Its Adsorption Property to Uranium |
| |
| PENG Guo-wen,XIAO Fang-zhu,SUN Shi-xiong,ZHANG Zhi-jun,HU Nan,WANG Xiao-liang,DING De-xin. Preparation of Functionalized Carbonaceous Magnetic Mesoporous Composite and Its Adsorption Property to Uranium[J]. Atomic Energy Science and Technology, 2015, 49(12): 2138-2144. DOI: 10.7538/yzk.2015.49.12.2138 |
| |
| Authors: | PENG Guo-wen XIAO Fang-zhu SUN Shi-xiong ZHANG Zhi-jun HU Nan WANG Xiao-liang DING De-xin |
| |
| Affiliation: | 1.School of Chemistry and Chemical Engineering, University of South China, Hengyang 421001, China; 2.Key Discipline Laboratory for National Defence for Biotechnology in Uranium Mining and Hydrometallurgy, University of South China, Hengyang 421001, China;3.Qinghai Jinrui Mining Development Co., Ltd., Xining 810008, China |
| |
| Abstract: | The macroporous silica SBA-15 as the hard template, a novel functionalized carbonaceous magnetic mesoporous composite (FCMMC) with highly ordered mesoporous structure was obtained using ferric nitrate and glucose as the precursors via one-step nanocasting followed by in-situ polymerization reaction, and using organic reagents UPTS and APS after grafting modification on its surface. FT-IR and N2 adsorption-stripping experiment were used to characterize FCMMC, and the factors impacting the adsorption of uranium on FCMMC were investigated including pH value, initial concentration of uranium ions, FCMMC dosage and adsorption time. The results show that the carbon and iron resource are successfully loaded on the mesoporous silica substrate, respectively. And FCMMC has high specific surface area and narrow pore size distribution. The optimal adsorption conditions are as following: The pH of the solution is 6.0, initial concentration of uranium ions is 25 mg/L, the FCMMC dosage is 40 mg and the adsorption time is 1.0 h. The kinetic model can be described by the pseudo-second-order model well, and its correlation coefficient is above 0.99. The isotherm model is fitted to Langmuir adsorption model, and the maximal theoretical adsorption capacity is 128.69 mg/g. At the same time, the adsorption rate is over 80% after FCMMC regenerated 8 times using three different desorption agents. This shows that FCMMC has good regeneration performance. |
| |
| Keywords: | carbonaceous magnetic mesoporous composite functionalization uranium adsorption property regeneration performance |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《原子能科学技术》浏览原始摘要信息 |
|
点击此处可从《原子能科学技术》下载全文 |
|
