首页 | 本学科首页   官方微博 | 高级检索  
     

基于LIBS技术的黄铜等离子体特征参量的研究
引用本文:赵小侠,罗文峰,张相武,李院院,杨森林. 基于LIBS技术的黄铜等离子体特征参量的研究[J]. 激光技术, 2013, 37(1): 93-96. DOI: 10.7510/jgjs.issn.1001-3806.2013.01.023
作者姓名:赵小侠  罗文峰  张相武  李院院  杨森林
作者单位:1.西安文理学院物理学与光电工程系, 西安 710065;
基金项目:西安市科技计划项目——西安文理学院科研创新基金资助项目,陕西省教育厅科学研究计划资助项目
摘    要:为了减小测量误差,采用改进的Boltzmann方法和Lorentz函数拟合方法,迭代计算得到黄铜等离子体的电子温度是6051K,拟合CuⅠ324.75nm得到等离子体的电子密度是3.31017cm-3.结果表明,经过9次迭代,电子温度的线性相关系数由0.73提高到0.98;经过15次叠加,电子密度的拟合相关度由0.90提高到0.96.这一结果对于精确求解等离子体的特征参量是有帮助的.

关 键 词:激光技术   等离子体特征参量   迭代玻尔兹曼方法   黄铜
收稿时间:2012-05-30

Measurement of brass plasma parameters based on laser-induced breakdown spectroscopy
ZHAO Xiao-xia , LUO Wen-feng , ZHANG Xiang-wu , LI Yuan-yuan , YANG Sen-lin. Measurement of brass plasma parameters based on laser-induced breakdown spectroscopy[J]. Laser Technology, 2013, 37(1): 93-96. DOI: 10.7510/jgjs.issn.1001-3806.2013.01.023
Authors:ZHAO Xiao-xia    LUO Wen-feng    ZHANG Xiang-wu    LI Yuan-yuan    YANG Sen-lin
Affiliation:1(1.Department of Physics and Opto-Electronic Engineering,Xi’an University of Arts and Science,Xi’an 710065,China;2.Department of Photo-Electric Technology,School of Electronic Engineering,Xi’an University of Posts & Telecommunications,Xi’an 710121,China)
Abstract:In order to minimize the measurement errors,an improved iterative Boltzmann plot method and Lorentz fitting method were used.The electron temperature Te in brass plasma was 6051K with the iterative calculation,and the electron density Ne of 3.31017cm-3 was inferred from the Stark broadened profile of Cu Ⅰ 324.75mm.The results show that the correlation coefficient is increased from 0.73 to 0.98 after 9 iterations in calculation of Te,and the correlation coefficient increases from 0.90 to 0.96 after 15 averaged numbers in calculation of Ne.The results are helpful to accurately calculate the parameters of plasma.
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号