| 联轴器扭转刚度对潜油电泵细长串联轴系扭振特性的影响研究 |
| |
| 引用本文： | 曾琪,宾光富,李超,陈立锋. 联轴器扭转刚度对潜油电泵细长串联轴系扭振特性的影响研究[J]. 工程设计学报, 2021, 28(1): 89-94. DOI: 10.3785/j.issn.1006-754X.2021.00.002 |
| |
| 作者姓名： | 曾琪 宾光富 李超 陈立锋 |
| |
| 作者单位： | 湖南科技大学机电工程学院,湖南湘潭411201;湖南科技大学机电工程学院,湖南湘潭411201;湖南科技大学机电工程学院,湖南湘潭411201;湖南科技大学机电工程学院,湖南湘潭411201 |
| |
| 基金项目： | 国家自然科学基金资助项目(51775030);湖南省自然科学基金资助项目(2019JJ40084);湖南省教育厅科学研究重点项目(19A171);湖南省研究生科研创新重点项目(CX20200986)。 |
| |
| 摘 要： | 为解决在满负荷、长周期运行工况下潜油电泵下保护器轴易断裂的问题,以潜油电泵细长串联轴系为研究对象,分析联轴器扭转刚度对细长串联轴系扭振特性的影响.采用DyRoBeS软件构建细长串联轴系扭振模型,分析轴系扭振特性,结合扭转振型与模态扭应力分布,确定轴系下保护器轴退刀槽为危险截面,研究联轴器扭转刚度与该危险截面扭应力的关系...
|
| 关 键 词： | 联轴器扭转刚度 细长串联轴系 扭振特性 有限元模型 潜油电泵 |
| 收稿时间： | 2021-02-25 |
Study on the influence of torsional stiffness of coupling on torsional vibration characteristics of slender series shafting of submersible oil electric pump |
| |
| ZENG Qi,BIN Guang-fu,LI Chao,CHEN Li-feng. Study on the influence of torsional stiffness of coupling on torsional vibration characteristics of slender series shafting of submersible oil electric pump[J]. Journal of Engineering Design, 2021, 28(1): 89-94. DOI: 10.3785/j.issn.1006-754X.2021.00.002 |
| |
| Authors: | ZENG Qi BIN Guang-fu LI Chao CHEN Li-feng |
| |
| Affiliation: | (School of Mechanical and Electrical Engineering,Hunan University of Science and Technology,Xiangtan 411201,China) |
| |
| Abstract: | Aiming to solve the problem that the protector shafting of submersible oil electric pump is easy to fracture under the full load and long-term operation condition,taking the slender series shafting of submersible oil electric pump as the study object,the influence of torsional stiffness of coupling on the torsional vibration characteristics of slender series shafting of submersible oil electric pump was analyzed.The DyRoBeS software was used to construct the torsional vibration model of the slender series shafting,and the torsional characteristics of shafting were analyzed.Combining the torsional mode and the modal torsional stress distribution,the relief groove on the protector shafting was verified to be the dangerous cross section.The relationship between torsional stiffness of the coupling and torsional stress on the dangerous cross section of shafting was studied.The analysis result showed that when the torsional stiffness of coupling 1 and 2 increased respectively in a certain proportion from 20%of the designed value to 500%,the amplification of the first order torsional vibration critical rotational speed of coupling 1 was 21%,while the amplification of coupling 2 was 64%.When the torsional stiffness of the coupling 1 was adjusted from the designed value to 40%of the designed value,the torsional stress of the dangerous section of the shaft section was reduced by about 55%.When the torsional stiffness of coupling 2 was adjusted from 300%of the designed value to 40%of the designed value,the torsional stress was reduced by about 35%.Adjusting the torsional stiffness of coupling 1 to 7.12×104 Nm/rad could effectively reduce the stress on the dangerous cross section of shaft section.The research provides a reference for solving the problem of fracture of protector shaft of slender series shafting of submersible oil electric pump. |
| |
| Keywords: | torsional stiffness of coupling slender series shafting torsional vibration characteristic finite element model submersible oil electric pump |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《工程设计学报》浏览原始摘要信息 |
|
点击此处可从《工程设计学报》下载免费的PDF全文 |
