| 核电厂凝结水精处理系统导致二回路水质钠离子浓度升高的原因分析与改进 |
| |
| 引用本文： | 程振华,王国良. 核电厂凝结水精处理系统导致二回路水质钠离子浓度升高的原因分析与改进[J]. 核动力工程, 2020, 41(6): 182-186. DOI: 10.13832/j.jnpe.2020.06.0182 |
| |
| 作者姓名： | 程振华 王国良 |
| |
| 作者单位： | 中广核工程有限公司核电安全监控技术与装备国家重点实验室,广东深圳,518172,阳江核电有限公司,广东阳江,529941 |
| |
| 摘 要： | 某蒸汽发生器排污系统(APG)中钠离子浓度超标,无法满足世界核运营者协会(WANO)国际先进化学指标。本文对核电厂二回路存在钠离子带入的可能原因以及凝结水精处理系统(ATE)运行前、后水质指标的差异进行分析,得出ATE的树脂再生性能直接决定了蒸汽发生器排污水钠离子浓度的高低。同时ATE再生时,最大化地去除油污以及适当地降低混床阴树脂再生时的碱耗量,使得ATE运行时,蒸汽发生器排污水中钠离子浓度满足WANO国际先进化学指标。
|
| 关 键 词： | 世界核运营者协会(WANO)先进化学指标 钠离子浓度超标 二回路水质 |
Analysis and Improvement of the Increasing of Sodium Ion in Secondary Loop Caused by Condensate Polishing Plant in Nuclear Power Plants |
| |
| Cheng Zhenhua,Wang Guoliang. Analysis and Improvement of the Increasing of Sodium Ion in Secondary Loop Caused by Condensate Polishing Plant in Nuclear Power Plants[J]. Nuclear Power Engineering, 2020, 41(6): 182-186. DOI: 10.13832/j.jnpe.2020.06.0182 |
| |
| Authors: | Cheng Zhenhua Wang Guoliang |
| |
| Abstract: | The content of sodium ion in one steam generator blowdown system cannot satisfy the WANO chemical indices. This paper analyzes the possible causes of sodium ions in the secondary loop of the nuclear power plant and the difference of water quality indicators before and after the operation of the condensate polishing plant. It is concluded that the resin regeneration effect of the condensate polishing plant directly determines the sodium ion content in the steam generator sewage. With the ATE regeneration,? the removal of the oil contamination can be maximized and? the sodium hydroxide consumption during the regeneration of the anion resin of mixed bed can be reduced, and the sodium ion content in the steam generator sewage can satisfy the WANO chemical indices when the ATE is operating. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《核动力工程》浏览原始摘要信息 |
|
点击此处可从《核动力工程》下载免费的PDF全文 |
