首页 | 本学科首页   官方微博 | 高级检索  
     

基于ZEMAX的半导体激光准直仿真设计
引用本文:陈国,赵长明,纪荣祎,李鲲,罗雄,白羽. 基于ZEMAX的半导体激光准直仿真设计[J]. 激光技术, 2012, 36(3): 318-321
作者姓名:陈国  赵长明  纪荣祎  李鲲  罗雄  白羽
作者单位:1.北京理工大学 光电学院 北京 100081
基金项目:国防科技工业技术基础科研资助项目(J172009C001)
摘    要:为了压缩905nm的半导体激光,以用于远程测距,采用几何光路原理,设计了由两个相互垂直的椭圆柱面透镜组成的准直系统,并在ZEMAX软件的非序列模式下实现仿真。半导体激光器快慢轴的初始发散角为30°和15°,经过柱面透镜后,半导体激光器两个方向的发散角都大大压缩;经准直后,激光束的快慢轴发散角分别为4.4mrad和3.6mrad,基本满足了远程测距的要求。结果表明,椭圆面柱透镜对半导体激光有很好的准直作用。

关 键 词:激光光学   发散角   几何光学   ZEMAX
收稿时间:2011-09-23

Simulation design of semiconductor laser collimation based on ZEMAX
CHEN Guo , ZHAO Chang-ming , JI Rong-yi , LI Kun , LUO Xiong , BAI Yu. Simulation design of semiconductor laser collimation based on ZEMAX[J]. Laser Technology, 2012, 36(3): 318-321
Authors:CHEN Guo    ZHAO Chang-ming    JI Rong-yi    LI Kun    LUO Xiong    BAI Yu
Affiliation:(School of Opotoelectronics,Beijing Institute of Technology,Beijing 100081,China)
Abstract:In order to compress 905nm semiconductor laser for remote distance measurement,based on geometrical optical theory, an alignment system composed of two vertical elliptical cylindrical lens was designed, then simulation was carried out in the non-sequential mode of ZEMAX software. Initial divergent angles of a semiconductor laser at fast axis and slow axis are 30° and 15° respectively. After passing through the cylindrical lens, these divergent angles became greatly compressed in both directions. After collimation, the divergent angles became 4.4mrad and 3.6mrad at fast axis and slow axis respectively, meeting the requirement of a remote distance detection lidar. The results show that the elliptical cylindrical lenses have good effect on semiconductor laser collimation.
Keywords:laser optics  divergence  geometrical optics  ZEMAX
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号