| 脉冲激光引信光电转换系统的设计 |
| |
| 引用本文： | 赵忠伟,张玉钧,沈超. 脉冲激光引信光电转换系统的设计[J]. 激光技术, 2012, 36(3): 326-329 |
| |
| 作者姓名： | 赵忠伟 张玉钧 沈超 |
| |
| 作者单位： | 1.电子工程学院 脉冲功率激光技术国家重点实验室 合肥 230037 |
| |
| 摘 要： | 为了应对脉冲激光引信回波信号弱、脉宽窄的特性,获得目标尽量多的不失真信息,对光电探测器的特性和放大电路的带宽进行了分析,设计了一套实用的光电转换系统,包括PIN探测电路、前置放大电路和主放大电路。经过TINA和MULTISIM软件模拟仿真和实验验证,设计的光电转换系统的带宽为61.089MHz,增益为72.14dB。结果表明,该系统对于脉宽为十几纳秒的回波脉冲信号进行了很好的低噪声、不失真放大,满足了设计要求,回波信号经光电转换系统后输出的信号与应用需要相匹配,为激光引信的后续信号处理提供了稳定可靠的信号。
|
| 关 键 词： | 光电子学 激光引信 光电转换系统 前置放大电路 主放大电路 |
| 收稿时间： | 2011-08-22 |
Design of a photoelectric conversion system for pulse laser fuze |
| |
| ZHAO Zhong-wei , ZHANG Yu-jun , SHEN Chao. Design of a photoelectric conversion system for pulse laser fuze[J]. Laser Technology, 2012, 36(3): 326-329 |
| |
| Authors: | ZHAO Zhong-wei ZHANG Yu-jun SHEN Chao |
| |
| Affiliation: | (State Key Laboratory of Pulsed Power Laser Technology,Electronic Engineering Institute,Heifei 230037,China) |
| |
| Abstract: | For responding to the weak signal and narrow pulse width feature of echo signals in pulse laser fuze and getting enough no distortion information of objectives, the feature of photodiode detector and the bandwidth of amplifier circuit were analyzed, and then an practical photoelectric conversion system was designed, including the PIN detector circuit, pre-amplifier circuit and main amplifier circuit. Through the actual experiments and simulation with the TINA and MULTISIM softwares, the bandwidth was 61.089MHz and the gain was 72.14dB. The result shows that the echo signal with pulse width more than 10ns was amplified with low noise and no distortion, which meets the designed requirements. The processed signals match the need of the following control system. |
| |
| Keywords: | optoelectronics laser fuze photoelectric conversion system pre-amplifier circuit main amplifier circuit |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载免费的PDF全文 |
|
