| AISI 410钢膏剂渗硼工艺渗层的组织与性能 |
| |
| 引用本文： | 石铭霄,王雄栋,李敬勇,杨志东,茅卫东,倪慧锋. AISI 410钢膏剂渗硼工艺渗层的组织与性能[J]. 金属热处理, 2022, 47(4): 245-250. DOI: 10.13251/j.issn.0254-6051.2022.04.042 |
| |
| 作者姓名： | 石铭霄 王雄栋 李敬勇 杨志东 茅卫东 倪慧锋 |
| |
| 作者单位： | 1.江苏科技大学 材料科学与工程学院, 江苏 镇江 212003;2.奇瑞新能源汽车股份有限公司, 安徽 芜湖 241003;3.新能源汽车轻量化技术安徽省重点实验室, 安徽 芜湖 241003;4.江南造船集团有限责任公司, 上海 201913 |
| |
| 摘 要： | 通过膏剂渗硼工艺对AISI 410钢进行表面强化,分析了渗硼层的组织形貌,并测试了其硬度、耐磨损性能以及耐腐蚀性能。结果表明,渗硼层主要由FeB、Fe2B相组成,渗硼层/母材的结合界面较平坦;渗硼层外渗区硬度达1400 HV0.5以上,内渗区硬度达1100 HV0.5以上;渗硼处理后试样表面摩擦因数和截面磨痕面积显著减小,耐磨损性能得到改善;在电化学腐蚀试验中,渗硼试样自腐蚀电位大于母材试样、自腐蚀电流密度小于母材试样,说明渗硼处理降低了AISI 410钢表面的腐蚀倾向,其表面耐蚀性得到提高。
|
| 关 键 词： | AISI410钢 膏剂渗硼 摩擦磨损 电化学测试 |
| 收稿时间： | 2021-11-18 |
Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing |
| |
| Shi Mingxiao,Wang Xiongdong,Li Jingyong,Yang Zhidong,Mao Weidong,Ni Huifeng. Microstructure and properties of boronized layer on AISI 410 steel by paste boronizing[J]. Heat Treatment of Metals, 2022, 47(4): 245-250. DOI: 10.13251/j.issn.0254-6051.2022.04.042 |
| |
| Authors: | Shi Mingxiao Wang Xiongdong Li Jingyong Yang Zhidong Mao Weidong Ni Huifeng |
| |
| Affiliation: | 1. School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang Jiangsu 212003, China;2. Chery New Energy Automobile Co., Ltd., Wuhu Anhui 241003, China;3. Anhui Key Laboratory of New Energy Automobile Lightweight Technology, Wuhu Anhui 241003, China;4. Shanghai Jiangnan Shipyard, Shanghai 201913, China |
| |
| Abstract: | Surface of AISI 410 steel was strengthened by the process of paste boronizing, and the microstructure of boronized layer was analyzed. The hardness, wear resistance and corrosion resistance of the AISI 410 steel were tested. The results show that the boronized layer is mainly composed of FeB and Fe2B phases, and the bonding interface between the boronized layer and matrix is flat. The microhardness of the outer zone of the boronized layer is higher than 1400 HV0.5, and the hardness of the inner zone is higher than 1100 HV0.5. After boronizing, the surface friction coefficient and worn area of the specimens are significantly reduced, and the wear resistance is improved. In the electrochemical corrosion test, the self-corrosive potential of the boronized specimen is higher than that of the base metal, the self-corrosive current density is lower than that of the base metal,indicating that boronized specimens are more resistant to corrosion, and the surface corrosion resistance is improved. |
| |
| Keywords: | AISI 410 steel paste boronizing wear resistance electrochemical test |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载免费的PDF全文 |
|
