| 一种盘式制动器钳体轻量化设计研究 |
| |
| 引用本文： | 唐进元,赵国伟. 一种盘式制动器钳体轻量化设计研究[J]. 中国机械工程, 2015, 26(17): 2285-2290 |
| |
| 作者姓名： | 唐进元 赵国伟 |
| |
| 作者单位： | 中南大学高性能复杂制造国家重点实验室，长沙，410083 |
| |
| 基金项目： | 国家自然科学基金资助项目（51275530） |
| |
| 摘 要： | 以体积和疲劳寿命为轻量化设计目标，采用计算机辅助集成技术对盘式制动器的钳体进行轻量化设计。利用有限元分析方法计算制动盘制动力矩并将其与实验测得的制动力矩进行比较，验证了有限元分析的步骤与方法正确可行;结合有限元分析得到的钳体的最大主应力，根据名义应力法和Smith方法计算钳体疲劳寿命;通过ISIGHT集成CATIA、ABAQUS和MATLAB对钳体进行轻量化设计。
|
| 关 键 词： | 制动钳体 轻量化 有限元分析 制动力矩 疲劳寿命 |
Research on Lightweight Design for Disc Brake Caliper |
| |
| Tang Jinyuan,Zhao Guowei. Research on Lightweight Design for Disc Brake Caliper[J]. China Mechanical Engineering, 2015, 26(17): 2285-2290 |
| |
| Authors: | Tang Jinyuan Zhao Guowei |
| |
| Affiliation: | State Key Labratory of High Performance Complex Manufacturing,Changsha,410083 |
| |
| Abstract: | Taking volume and fatigue life as lightweight design goal, an integrated computer-aided technology was used for disc brake caliper's lightweight design. First, through comparing the barking torque which got by FEA and experiments it is proved that FEA's steps and methods are correct and feasible. Then, combining the maximum principal stress which got by FEA with nominal stress method and Smith method was used to calculate the fatigue of caliper. Finally, Through ISIGHT integrating CATIA、ABAQUS and MATLAB, the lightweight of caliper was performed. |
| |
| Keywords: | brake caliper lightweight finite element analysis(FEA) brake torque fatigue life |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载免费的PDF全文 |
