| 基于点集贝塞尔曲线优化的激光振镜加工算法 |
| |
| 引用本文： | 沈志飞,刘晓东,费锡磊,康恺. 基于点集贝塞尔曲线优化的激光振镜加工算法[J]. 激光技术, 2021, 45(5): 548-553. DOI: 10.7510/jgjs.issn.1001-3806.2021.05.002 |
| |
| 作者姓名： | 沈志飞 刘晓东 费锡磊 康恺 |
| |
| 作者单位： | 华中科技大学 激光加工国家工程研究中心,武汉430074 |
| |
| 摘 要： | 为了解决激光振镜加工中由于数据点集过于密集导致激光在单点停滞时间过长引起激光烧蚀问题,将原始数据点集经过稀疏化、曲线点集分段、三角二分法贝塞尔曲线拟合数据处理,转换成由少量直线和曲线构成的实体,在激光路径输出时,根据输出放大倍数的大小及曲线曲率大小对曲线进行整体的适应性插补,从而解决因放大倍数不同引起的数据点过密或过疏...
|
| 关 键 词： | 激光技术 激光振镜加工 贝塞尔曲线优化 三角二分法 弦高误差分割 激光烧蚀 |
| 收稿时间： | 2020-10-09 |
Laser galvanometer processing algorithm based on Bezier curve optimization of point set |
| |
| Abstract: | In order to solve the problem of laser ablation due to the long time laser stop at the single point caused by the excessive density of the data point set in laser galvanometer processing, the original data point set was processed by thinning, curve point set segmentation, and triangular dichotomy Bezier curve fitting data processing, which was converted into an entity composed of a few line and curve. When laser marking, the curve was adaptively interpolated according to the output resolution and curve curvature to solve the problem of too dense or too sparse data points caused by different magnification. By marking the original and processed data with different marking magnification, the results show that the fitted data eliminates the laser ablation phenomenon caused by over-density of the data under the guaranteed 2μm accuracy of the original data. It also has a smoother marking effect at high magnification, as well as a higher marking efficiency and quality. It provides a reference for high density laser processing and has a good application prospect in the field of high quality laser processing such as laser precision etching. |
| |
| Keywords: | |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《激光技术》浏览原始摘要信息 |
|
点击此处可从《激光技术》下载免费的PDF全文 |
|
