首页 | 本学科首页   官方微博 | 高级检索  
     

平板微热管阵列垂直传热的数值分析
引用本文:王宏燕,赵耀华. 平板微热管阵列垂直传热的数值分析[J]. 化工学报, 2014, 65(2): 508-515. DOI: 10.3969/j.issn.0438-1157.2014.02.020
作者姓名:王宏燕  赵耀华
作者单位:北京工业大学建筑工程学院, 北京 100022
基金项目:北京市自然科学基金项目(Z1004020201201)。
摘    要:对新型高效传热元件平板微热管阵列(MHPA)的工作机理进行了理论研究。通过建立分区微元模型对热管冷凝段内部工质的流动与传热过程进行了分析。确定了微槽内冷凝液膜的厚度,温度场分布及质量流量等物理参数。利用Matlab软件编写的程序计算结果与实验值吻合较好,最大误差在5%以内。根据软件计算的结果,拟合得到了冷凝段内部饱和温度的表达式。

关 键 词:微热管  凝结  传热  数值分析  
收稿时间:2013-03-29
修稿时间:2013-11-12

Numerical investigation on heat transfer of vertical micro-heat pipe arrays
WANG Hongyan,ZHAO Yaohua. Numerical investigation on heat transfer of vertical micro-heat pipe arrays[J]. Journal of Chemical Industry and Engineering(China), 2014, 65(2): 508-515. DOI: 10.3969/j.issn.0438-1157.2014.02.020
Authors:WANG Hongyan  ZHAO Yaohua
Affiliation:College of Architecture and Civil Engineering, Beijing University of Technology, Beijing 100022, China
Abstract:The paper is focused on the working mechanism of micro-heat pipe arrays (MHPAs), which are new efficient phase transition components. The three-dimensional partition-minuteness model is made to analyze the flow and heat transfer in the MHPAs by using the theory of two-phase closed thermosyphon and the theory of condensation on vertical walls with micro-channels. The surface tension is considered in the model. Through partitioning the condensate on the surface of microchannels, the flow and heat transfer are analyzed, giving the thickness of condensate, temperature distribution and mass flux. The Matlab programs based on the three-dimensional partition-minuteness model are used. The calculation results agree with the experimental results. The error is within 5%. The formulas for the saturation temperature in the condensation part of the MHPA are obtained from the calculated results.
Keywords:micro heat pipe  condensation  heat transfer  mumerical analysis
本文献已被 CNKI 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号