| 带钢热连轧AGC系统实时仿真 |
| |
| 引用本文： | 王正林, 孙一康, 彭开香. 带钢热连轧AGC系统实时仿真[J]. 工程科学学报, 2006, 28(2): 171-174. DOI: 10.13374/j.issn1001-053x.2006.02.039 |
| |
| 作者姓名： | 王正林 孙一康 彭开香 |
| |
| 作者单位： | 北京科技大学信息工程学院,北京,100083;北京科技大学信息工程学院,北京,100083;北京科技大学信息工程学院,北京,100083 |
| |
| 基金项目： | 国家经贸委科技攻关项目 |
| |
| 摘 要： | 设计了基于数字信号处理器(DSP)的热连轧自动厚度控制(AGC)实时仿真器,建立了调厚过程压下系统和变形区的动态模型．仿真时,仿真器实时并行地计算带钢和轧机的模型,计算机控制系统的控制器运行AGC软件,两者通过内存映像网实时交换数据,通过虚拟的对象实现了对AGC软件的实时离线调试．
|
| 关 键 词： | 自动厚度控制 带钢热连轧 实时仿真器 动态仿真 数字信号处理器 内存映像网 |
| 收稿时间： | 2004-10-15 |
| 修稿时间： | 2005-02-24 |
Real-time simulator of an AGC system for hot-rolling mill |
| |
| WANG Zhenglin, SUN Yikang, PENG Kaixiang. Real-time simulator of an AGC system for hot-rolling mill[J]. Chinese Journal of Engineering, 2006, 28(2): 171-174. DOI: 10.13374/j.issn1001-053x.2006.02.039 |
| |
| Authors: | WANG Zhenglin SUN Yikang PENG Kaixiang |
| |
| Abstract: | A real-time simulator of Automatic Gauge Control (AGC) for hot-rolling mill based on Digital Signal Processor (DSP) was proposed. The models of the hydraulic cylinder for Automatic Position Control (APC) and the deformation area of each stand were built. The simulator was performed by using parallel processing based on dynamic simulation of the characteristic of the strip and the stands which were coupled by the rolled material, and exchange data with the AGC controller of a computer control system through reflective memory network in a real-time mode. It could be used for developing and real-time testing AGC control strategies in off-line state. When simulated, the dynamic models were executed by a digital signal processing card and exchange data with the AGC controller in a real-time mode. |
| |
| Keywords: | automatic gauge control strip hot-rolling real-time simulator digital signal processor reflective memory network |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《工程科学学报》浏览原始摘要信息 |
|
点击此处可从《工程科学学报》下载全文 |
|
