|
|||||
|
|
| 加热方式对管壳式相变蓄热单元强化传热的可视化及数值模拟 | |
| 引用本文： | 熊鑫,苏庆宗,农增耀,王亚雄. 加热方式对管壳式相变蓄热单元强化传热的可视化及数值模拟[J]. 化工进展, 2022, 41(9): 4635-4643. DOI: 10.16085/j.issn.1000-6613.2021-2468 |
| 作者姓名： | 熊鑫 苏庆宗 农增耀 王亚雄 |
| 作者单位： | 内蒙古科技大学化学与化工学院,内蒙古包头014010;内蒙古科技大学机械工程学院,内蒙古包头014010;内蒙古科技大学化学与化工学院,内蒙古包头014010;内蒙古自治区煤化工与煤炭综合利用重点实验室,内蒙古包头014010 |
| 基金项目： | 鄂尔多斯科技重大专项(2019ZD065);内蒙古自治区关键技术攻关计划(2020GG0153) |
| 摘 要： | 为了提高相变蓄热系统在实际应用中的蓄热速率，本文建立了管壳式相变蓄热单元可视化实验平台，提出了一种外部加热法的强化传热方式，讨论了相变蓄热单元在外部加热法时的熔化特性和传热机理。通过Fluent软件模拟对比了外部加热法和内部加热法在熔化过程中的液相分数、熔化速率和均匀性等方面的差异。研究结果表明：外部加热法的使用能大幅提升蓄热单元的蓄热效率。与内部加热法相比，外部加热法在熔化过程中的传热和相变更加均匀。相比于内部加热法，由于外部加热法传热面积较大，熔化时间缩短了69.1%；在消除传热面积的影响后，外加热方法依靠广泛而强烈的自然对流使熔化时间减少了23.2%。 |
| 关 键 词： | 相变蓄热 熔化特性 传热机理 自然对流 管壳式 |
| 收稿时间： | 2021-12-02 |
Visualization and numerical analysis of heat transfer enhancement in the shell and tube latent thermal energy storage unit by the heating method |
|
| XIONG Xin,SU Qingzong,NONG Zengyao,WANG Yaxiong. Visualization and numerical analysis of heat transfer enhancement in the shell and tube latent thermal energy storage unit by the heating method[J]. Chemical Industry and Engineering Progress, 2022, 41(9): 4635-4643. DOI: 10.16085/j.issn.1000-6613.2021-2468 | |
| Authors: | XIONG Xin SU Qingzong NONG Zengyao WANG Yaxiong |
| Affiliation: | 1.School of Chemistry and Chemical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, Inner Mongolia, China 2.School of Mechanical Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, Inner Mongolia, China 3.Inner Mongolia Key Laboratory of Coal Chemical Engineering and Comprehensive Utilization, Baotou 014010, Inner Mongolia, China |
| Abstract: | In order to improve the heat storage rate of the latent thermal storage system in practical applications, an experimental platform for visualizing the thermal performance of the shell-and-tube latent thermal storage unit is established, an enhanced heat transfer method of the outside heating method is proposed, and the heat transfer mechanism of the outside heating method in the melting process is discussed. The differences between the outside heating method and the inside heating method in terms of liquid fraction and homogeneity are also analyzed by simulation comparison. The results show that the outside heating method has more uniform heat transfer in the melting process compared with the inside heating method. The outside heating method reduces the melting time by 69.1% due to the larger heat transfer area; after eliminating the effect of heat transfer surface, the outside heating method relies on extensive and strong natural convection to reduce the melting time by 23.2%. |
| Keywords: | latent heat storage melting performance heat transfer mechanism natural convection shell and tube |
| 本文献已被 万方数据 等数据库收录！ | |
| 点击此处可从《化工进展》浏览原始摘要信息 | |
| 点击此处可从《化工进展》下载免费的PDF全文 | |