Three‐dimensional simulation of the time‐dependent fluid flow and fouling behavior in an industrial hollow fiber membrane module |
| |
| Authors: | Liwei Zhuang Gance Dai Zhen‐Liang Xu |
| |
| Affiliation: | State Key Laboratory of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China |
| |
| Abstract: | A novel three‐dimensional CFD model has been developed on the basis of fluid flow in the shell and lumen sides, and permeation and fouling behavior in the porous membrane zone. The simulated 25‐min dead‐end outside‐in filtration process showed that the energy consumed by the inlet manifold decreases during the constant pressure filtration. The velocity and pressure distributions in the module change with time. Flux distribution both in the axial and radial directions becomes increasingly more uniform, so does the cake distribution. Flux distribution and cake distribution inter‐adjust each other in different modes. A correlation equation has been developed to describe the relationship between the volumetric flow rate and accumulated water production. The correlation equation with simple experiment enables the dynamic evolution of energy consumed by shell inlet manifold to be presented, which can be the criterion of how well the shell inlet manifold or module has been designed. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2655–2669, 2018 |
| |
| Keywords: | hollow fiber membrane module CFD simulation fluid flow fouling behavior time‐dependent |
|
|
