| 基于纳米增强相变材料的铜-水热管传热性能分析 |
| |
| 引用本文： | 田东民,吴延鹏,陈凤君. 基于纳米增强相变材料的铜-水热管传热性能分析[J]. 化工学报, 2020, 71(z1): 220-226. DOI: 10.11949/0438-1157.20200113 |
| |
| 作者姓名： | 田东民 吴延鹏 陈凤君 |
| |
| 作者单位： | 1.北京科技大学土木与资源工程学院，北京 100083;2.北京中创绿色系统科技有限公司，北京 100024 |
| |
| 摘 要： | 基于磁力搅拌和超声振荡处理工艺制备了含有不同质量分数纳米氧化铝颗粒的月桂酸固体悬浮液，并测试其热导率。利用相变材料与普通热管绝热段的耦合方式，通过测量不同加热模式下热管各部分的温度，对热管的性能进行分析。结果表明：月桂酸包裹在热管绝热段周围时，可有效降低蒸发段的温度。加入适量浓度的金属氧化物纳米颗粒后，其导热能力得到强化。热管的冷却性能随着月桂酸中氧化铝纳米颗粒浓度增长，先增长后降低，质量分数1.0%为最佳浓度。相比纯月桂酸与普通热管的耦合模块，加入1.0%的氧化铝颗粒可降低10%的蒸发段温度，降低60%的风机能耗，可在加热期间存储27%的热能。
|
| 关 键 词： | 相变材料 纳米流体 热管 月桂酸 热导率 |
| 收稿时间： | 2020-02-03 |
| 修稿时间： | 2020-02-23 |
Analysis of heat transfer performance of copper-water heat pipe based on nano enhanced-PCM |
| |
| TIAN Dongmin,WU Yanpeng,CHEN Fengjun. Analysis of heat transfer performance of copper-water heat pipe based on nano enhanced-PCM[J]. Journal of Chemical Industry and Engineering(China), 2020, 71(z1): 220-226. DOI: 10.11949/0438-1157.20200113 |
| |
| Authors: | TIAN Dongmin WU Yanpeng CHEN Fengjun |
| |
| Affiliation: | 1.School of Civil and Resources Engineering, University of Science and Technology Beijing, Beijing 100083, China;2.Beijing Zhongchuang Green System Technology Co. , Ltd, Beijing 100024, China |
| |
| Abstract: | In this paper, the solid suspension of lauric acid with different mass fraction of nano-alumina particles was prepared based on magnetic stirring and ultrasonic shock processing, and its thermal conductivity was tested. By means of the coupling between phase change material and the adiabatic section of the ordinary heat pipe, the temperature of each part of the heat pipe under different heating modes was measured, and the performance of the heat pipe was analyzed. The results show that when lauric acid is wrapped around the adiabatic section of the heat pipe, the temperature of evaporation section can be effectively reduced. The thermal conductivity of metal oxide nanoparticles was enhanced by adding appropriate concentration of metal oxide nanoparticles. The cooling performance of the heat pipe increased with the concentration of alumina nanoparticles in lauric acid. With the increase of concentration, the effect increased at first and then decreased. The mass fraction was the optimal concentration of 1.0%. Compared with the coupling module of pure lauric acid and ordinary heat pipe, adding 1.0% alumina particles can reduce the evaporation temperature by 10%, reduce the fan energy consumption up to 60%, and store nearly 27% of the input power during heating. |
| |
| Keywords: | phase change material nanofluids heat pipe lauric acid thermal conductivity |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载免费的PDF全文 |
|
