首页 | 本学科首页   官方微博 | 高级检索  
     

基于模型预测控制的环形交叉口信号配时方法
引用本文:杨庆芳,赵小辉,郑黎黎,张伟. 基于模型预测控制的环形交叉口信号配时方法[J]. 浙江大学学报(工学版), 2018, 52(1): 117-124. DOI: 10.3785/j.issn.1008-973X.2018.01.016
作者姓名:杨庆芳  赵小辉  郑黎黎  张伟
作者单位:1. 吉林大学 交通学院, 吉林 长春 130022;2. 山东高速股份有限公司, 山东 济南 250000
基金项目:国家自然科学基金资助项目(51308249,51308248);山东省省管企业科技创新项目(20122150251-1).
摘    要:面向城市环形交叉口,尤其是多支路环交,以更好地适应道路交通流的时变特性为目的,采用模型预测控制思想,建立环道和入口处的动态过程预测模型.通过在线求解并滚动优化目标函数,得出一个滚动周期内环形交叉口轮放式控制的最佳信号配时参数.根据顺时针轮放相序和相位搭接规则,将动态配时方案作用于环形交叉口.仿真结果表明,利用提出的信号配时方法更加合理地分配了环形交叉口时空资源,对于多路畸形环交,有显著的避免环内"死锁"的效果,环形交叉口的整体运行性能显著提升.


Signal timing method for roundabouts based on model predictive control
YANG Qing-fang,ZHAO Xiao-hui,ZHENG Li-li,ZHANG Wei. Signal timing method for roundabouts based on model predictive control[J]. Journal of Zhejiang University(Engineering Science), 2018, 52(1): 117-124. DOI: 10.3785/j.issn.1008-973X.2018.01.016
Authors:YANG Qing-fang  ZHAO Xiao-hui  ZHENG Li-li  ZHANG Wei
Abstract:The theory of model predictive control was used in order to better adapt to the time-varying characteristics of traffic flow regarding city roundabouts, especially multiple malformation roundabouts. A prediction model of the traffic behavior generated by a dynamic traffic model was constructed. The optimal signal timing parameters of roundabouts were got by optimizing the objective function online in the receding horizon. Then the roundabouts' signal timing scheme with clockwise release order and phase overlapping rules were given. The simulation results show that the proposed control method is more reasonable distribution of time and space resources in roundabouts. The method can effectively avoid the effect of "dead lock" in multiple malformation roundabouts and improve overall performance.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《浙江大学学报(工学版)》浏览原始摘要信息
点击此处可从《浙江大学学报(工学版)》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号