| 温度对焊接热模拟X80管线钢断裂韧性的影响 |
| |
| 引用本文： | 徐杰,李朋朋,樊宇,孙智. 温度对焊接热模拟X80管线钢断裂韧性的影响[J]. 焊接学报, 2017, 38(1): 22-26 |
| |
| 作者姓名： | 徐杰 李朋朋 樊宇 孙智 |
| |
| 作者单位： | 中国矿业大学 材料科学与工程学院, 江苏 221116 |
| |
| 基金项目： | 国家自然科学基金资助项目（51301197）；江苏省自然科学基金资助项目（BK20130182） |
| |
| 摘 要： | 通过试验和3D有限元模拟相结合的方法分析了焊接热模拟X80管线钢在不同温度（-90，-60，-30和0℃）下的断裂韧度.文中选取标准三点弯曲试样在不同温度下进行断裂韧度测试，同时对测试件进行三维有限元实体建模与分析计算.结果表明，X80管线钢的断裂韧性随温度减低显著减小，并使其倾向于脆性断裂.材料在不同温度下的真实应力-应变曲线行为从光滑拉伸到断裂力学试样具有良好的可传递性，温度对材料的硬化行为没有明显影响，有限元计算的结果表明，应用该方法可以准确地计算X80钢焊接热影响区不同温度下的CTOD值.
|
| 关 键 词： | 焊接热模拟 X80管线钢 断裂韧性 有限元分析 |
| 收稿时间： | 2014-12-14 |
Effect of temperature on fracture toughness in weld thermal simulated X80 pipeline steels |
| |
| XU Jie,LI Pengpeng,FAN Yu and SUN Zhi. Effect of temperature on fracture toughness in weld thermal simulated X80 pipeline steels[J]. Transactions of The China Welding Institution, 2017, 38(1): 22-26 |
| |
| Authors: | XU Jie LI Pengpeng FAN Yu SUN Zhi |
| |
| Affiliation: | School of Materials Science and Engineering, China University of Mining and Technology(CUMT), Jiangsu 221116, China |
| |
| Abstract: | The aim of this paper is to study the effect of temperature on cleavage fracture toughness of weld thermal simulated X80 pipeline steels in ductile-to-brittle transition (DBT) regime. A large number of fracture toughness (as denoted by crack tip opening displacement-CTOD) tests together with finite element analyses are carried out by using deep-cracked single edge notched bending (SENB with a/W=0.5) specimens at various temperatures (-90℃, -60℃, -30℃ and 0℃). 3D finite element models of tested specimens have been used for the numerical simulation in this study. Coarse-grained heat-affected zone (CGHAZ) is considered as the material microstructure in preparation of weld thermal simulated fracture mechanics specimens. It has been found that the transferability of the true stress-strain curves obtained from weld thermal simulated round tensile bar to the fracture mechanics specimens works very well. Temperature shows only a slight effect on the material hardening behavior. As compared with experimental results, the 3D model can precisely predict the fracture toughness (CTOD-values) at different temperatures considered in this study. |
| |
| Keywords: | weld thermal simulation fracture toughness X80 pipeline steel finite element analysis |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
