| 多次重复固溶时效处理对TB15钛合金组织和力学性能的影响 |
| |
| 引用本文： | 赵安安,胡生双,陈素明,张颖云,赵虎,张颖. 多次重复固溶时效处理对TB15钛合金组织和力学性能的影响[J]. 金属热处理, 2022, 47(11): 91-94. DOI: 10.13251/j.issn.0254-6051.2022.11.015 |
| |
| 作者姓名： | 赵安安 胡生双 陈素明 张颖云 赵虎 张颖 |
| |
| 作者单位： | 中航西安飞机工业集团股份有限公司, 陕西 西安 710089 |
| |
| 摘 要： | 利用光学显微镜、拉伸试验机和扫描电镜等手段研究了多次重复固溶时效处理对TB15钛合金显微组织和力学性能的影响。结果表明,随着固溶时效处理重复次数的增加,TB15钛合金的显微组织发生了较为明显的变化,次生α相合并长大,原始β晶粒晶界增厚;1次固溶时效处理后合金的综合力学性能达到最优,随着固溶时效处理重复次数的增加,合金的强度和断裂韧度均降低,伸长率和断面收缩率也急剧降低,断裂类型从韧性断裂向脆性断裂转变;相同工艺参数的重复固溶时效处理不能实现在不大幅降低强度和断裂韧度的前提下改善该合金的室温塑性。
|
| 关 键 词： | 多次重复热处理 TB15钛合金 力学性能 组织 |
| 收稿时间： | 2022-05-20 |
Effect of multiple repeated solution and aging treatment on microstructure and mechanical properties of TB15 titanium alloy |
| |
| Zhao An'an,Hu Shengshuang,Chen Suming,Zhang Yingyun,Zhao Hu,Zhang Ying. Effect of multiple repeated solution and aging treatment on microstructure and mechanical properties of TB15 titanium alloy[J]. Heat Treatment of Metals, 2022, 47(11): 91-94. DOI: 10.13251/j.issn.0254-6051.2022.11.015 |
| |
| Authors: | Zhao An'an Hu Shengshuang Chen Suming Zhang Yingyun Zhao Hu Zhang Ying |
| |
| Affiliation: | AVIC Xi'an Aircraft Industry Group Company Co., Ltd., Xi'an Shaanxi 710089, China |
| |
| Abstract: | Effect of multiple repeated solution and aging treatment on microstructure and mechanical properties of TB15 titanium alloy was studied by means of optical microscope, tensile testing machine and scanning electron microscope. The results show that with the increase of the repeating time of solution and aging treatment, the microstructure of the TB15 titanium alloy changes obviously, the secondary α phase merges and grows, and the original β grain boundary thickens. The mechanical properties of the alloy after one time solution and aging treatment is the best, however, with the increase of repeating time, the strength and fracture toughness of the alloy decrease, the elongation and reduction of area also decrease sharply, and the tensile fracture changes from ductile fracture to brittle fracture. In conclusion, multiple repeated solution and aging treatment with the same process parameters cannot improve the room temperature ductility of the alloy without drastically reducing the strength and fracture toughness. |
| |
| Keywords: | multiple repeated heat treatment TB15 titanium alloy mechanical properties microstructure |
|
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载免费的PDF全文 |
|
