尾矿絮体结构的分形特征及其沉降速度研究 |
| |
引用本文: | 刘晓辉,阮竹恩,朱权洁,张立强. 尾矿絮体结构的分形特征及其沉降速度研究[J]. 矿业科学学报, 2023, 8(3): 390-397. DOI: 10.19606/j.cnki.jmst.2023.03.012 |
| |
作者姓名: | 刘晓辉 阮竹恩 朱权洁 张立强 |
| |
作者单位: | 1.华北科技学院安全工程学院,河北廊坊 065201 |
| |
基金项目: | 国家自然科学基金52074121河北省自然科学基金E2019508145 |
| |
摘 要: | 絮凝沉降广泛存在于尾矿处置的各个工艺环节,实现尾矿絮凝沉降速度的精确测算对于指导尾矿充填及地表堆存等工程问题具有重要的现实意义。本文借助分形理论研究了尾矿絮凝体的结构特征,建立了絮凝体几何尺寸与颗粒粒径、分形维数之间的数学关系,综合分析了浮力效应、回流效应以及黏滞效应对絮凝体沉降的影响作用,最终构建了沉降速度的测算模型。开展尾矿絮凝沉降试验,同时利用聚焦光束反射测量(FBRM)技术对絮凝体几何形态的变化进行观测,并根据实测数据对沉降速度测算模型进行了验证分析。结果显示:絮凝体沉降速度随其等效粒径增大而增大,可划分为加速沉降、匀速沉降、压密沉降3个阶段;试验尾矿絮凝体的粒径为140~350μm,当分形维数取2.25时,沉降速度为1.3~2.0 mm/s,模型计算值与实测值存在较好的相关性,具有一定的实际应用价值。
|
关 键 词: | 尾矿 絮凝沉降 絮凝体 分形维数 沉降速度 |
收稿时间: | 2022-06-13 |
Study on fractal feature and settling velocity of tailings floc |
| |
Affiliation: | 1.School of Safety Engineering, North China Institute of Science & Technology, Langfang Hebei 065201, China2.School of Civil and Resources Engineering, University of Science and Technology Beijing, Beijing 100083, China |
| |
Abstract: | Flocculent settling widely exists in various processes of tailings disposal.It bears significance for the accurate calculation of the flocculent settling velocity in engineering, such as tailings backfilling and surface disposal.This paper studied the structural characteristics of tailings flocs from the perspective of the fractal theory, and established the mathematical relationship between tailings particle size, geometry size of floc and fractal dimension.It analyzed the influence of buoyancy effect, reflux effect and viscosity effect on floc settling, and deduced a calculation formula of tailings flocculent settling velocity.This study carried out a tailings flocculent settling test observed the changes in geometric morphology of flocs by focused beam reflectance measurement technology(FBRM), and carried out validation analysis between testing data and model calculation value.The results showed that the settling velocity increased with the equivalent grain size of flocs, which could be divided into three stages, namely accelerated settling, uniform settling and compaction settling.The equivalent grain size of flocs of test tailings were 140~350 μm, and the settling velocity calculated by the formula were 1.3~2.0 mm/s when the fractal dimension was 2.25, which demonstrates significant correlation with the testing value, and had certain practical application value. |
| |
Keywords: | |
|
| 点击此处可从《矿业科学学报》浏览原始摘要信息 |
|
点击此处可从《矿业科学学报》下载免费的PDF全文 |
|