Aspects of varying crosslinker and catalyst concentrations on tear strength of silicone polymer networks: Comparison of tear strengths using samples of different geometries |
| |
| Authors: | Gul Bali Shah |
| |
| Affiliation: | Department of Metallurgy and Material Engineering (DMME), Pakistan Institute of Engineering and Applied Sciences (PIEAS), Islamabad, Pakistan |
| |
| Abstract: | Crosslinker and catalyst concentrations have been varied to prepare different hydroxyfunctional poly(dimethylsiloxane) (HOPDMS) polymer network compositions. The tear strengths of these silicone polymer networks have been measured using different geometries, as trouser, crescent, and Graves (angled) specimens. It has been observed that the results of tear strength of Graves and crescent‐shaped specimens do not show a constant ratio with the concentration of crosslinker used for curing of HOPDMS networks. Instead, it has been observed and reported for the first time that the tear strengths of Graves and crescent‐shaped samples show a crossover at about 1.2% crosslinker. The observation of this crossover pattern for different compositions of silicone networks show that it is difficult to compare the results of the tear test of the same polymer performed on samples of different geometries with one another. The crossover pattern of the tear energy results for the test specimens of two different geometries has been explained in the light of essential work facture theory based on the geometry of the testing sample, crosslinking, and testing that alters the distribution of force over the width of the specimen. It was shown that the change in composition of the HOPDMS networks changes the order of ranking of Graves and crescent tear tests. With varying catalyst concentration in the silicone network composition, the tear property differences between the Graves and crescent‐shaped specimens are not significant. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43115. |
| |
| Keywords: | crosslinking elastomers mechanical properties |
|
|
