首页 | 本学科首页   官方微博 | 高级检索  
     

湿度对胶合木销槽承压强度的影响试验
引用本文:马贵进,徐德良,陆伟东,刘伟庆,宋佳程. 湿度对胶合木销槽承压强度的影响试验[J]. 建筑科学与工程学报, 2016, 0(1): 120-126
作者姓名:马贵进  徐德良  陆伟东  刘伟庆  宋佳程
作者单位:南京工业大学土木工程学院
摘    要:为了研究湿度对胶合木销槽承压强度的影响,选取湿度分别为50%,70%,90%,木材纹理方向分别为顺纹、斜纹、横纹的45个胶合木试件进行销槽承压强度试验,并将试验结果与各国规范公式计算结果进行比较。结果表明:试件销槽承压破坏模式与胶合木纹理方向有关;相对湿度线性增长时,销槽承压强度与试件初始刚度呈现非线性下降趋势;根据规范公式计算的试件销槽承压强度与试验值吻合度较差,需要进一步优化现有规范公式。

关 键 词:胶合木  湿度  破坏模式  销槽  承压强度  初始刚度

Experiment on Effect of Humidity on Dowel Bearing Strength of Glued Laminated Timber
MA Gui-jin,XU De-liang,LU Wei-dong,LIU Wei-qing,SONG Jia-cheng. Experiment on Effect of Humidity on Dowel Bearing Strength of Glued Laminated Timber[J]. Journal of Architecture and Civil Engineering, 2016, 0(1): 120-126
Authors:MA Gui-jin  XU De-liang  LU Wei-dong  LIU Wei-qing  SONG Jia-cheng
Affiliation:College of Civil Engineering, Nanjing Tech University
Abstract:In order to study the effect of humidity on dowel bearing strength of glued laminated timber, 45 specimens of glued laminated timber including three kinds of humidity (50%, 70% and 90%) and three kinds of grain direction (longitudinal grain, diagonals grain, horizontal grain) were chosen in dowel bearing strength test, and the comparison between experimental results and the calculated results according to international standard formula was given. The results show that failure mode is related to the grain direction of glued laminated timber. With the linear growth of relative humidity, the dowel bearing strength and initial stiffness exhibit the trend of nonlinear decline. The calculated values of dowel bearing strength according to the existing standard formula are in poor agreement with the test values, so the existing standard formula needs to be optimized furtherly.
Keywords:glued laminated timber  humidity  failure mode  dowel  bearing strength  initial stiffness
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《建筑科学与工程学报》浏览原始摘要信息
点击此处可从《建筑科学与工程学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号