| 高炉冶金矿渣特性及其在ZTA陶瓷烧结中的作用 |
| |
| 引用本文： | 卢红霞,高凯,李明亮,梁新星. 高炉冶金矿渣特性及其在ZTA陶瓷烧结中的作用[J]. 矿产保护与利用, 2020, 40(3): 26-33. DOI: 10.13779/j.cnki.issn1001-0076.2020.03.005 |
| |
| 作者姓名： | 卢红霞 高凯 李明亮 梁新星 |
| |
| 作者单位： | 1.郑州大学 材料科学与工程学院(河南省资源与材料工业技术研究院)，河南 郑州 450001 |
| |
| 基金项目： | 河南省科技攻关计划;智汇郑州聚才计划 |
| |
| 摘 要： | 高炉渣是由炼铁高炉产生的一种工业废渣,其中含有CaO、Al2O3、SiO2等硅酸盐成分和少量Fe2O3、TiO2、ZrO2等析晶形核剂。高炉渣在855℃热处理1 h,可形核析出1μm左右的Ca2Al2SiO7微晶,这表明高炉渣具有较高的析晶活性。向ZTA中添加质量分数为4%的高炉渣,1 550℃烧结30 min,低温下ZTA陶瓷的力学性能明显提升,抗弯强度和断裂韧性分别为650 MPa和6.03 MPa·m1/2,比相同温度下未添加高炉渣时分别提高了15%和14.2%,烧结温度降低了50℃以上。颗粒细化的高炉渣掺入ZTA陶瓷基体,烧结过程中高炉渣产生的液相促进了Al2O3棒晶的生长,受力过程中棒晶的拔出和裂纹的偏转有利于ZTA陶瓷力学性能的提升;高炉渣在高温下的析晶增强了ZTA陶瓷的晶界强度,进一步提高了...
|
| 关 键 词： | 高炉渣 ZTA陶瓷 陶瓷烧结 析晶 |
| 收稿时间： | 2020-05-18 |
Characteristics of Blast Furnace Slag and Its Role in ZTA Ceramics Sintering |
| |
| Affiliation: | 1.School of Materials Science and Engineering(Henan Province Industrial Technology Research Institute of Resources and Materials), Zhengzhou University, Zhengzhou 450001, China2.Zhengzhou Fangming High Temperature Ceramic New Material Co., Ltd., Zhengzhou 452384, China |
| |
| Abstract: | Blast furnace slag is an industrial waste slag produced by ironmaking blast furnace, which contains silicate components such as CaO, Al2O3, SiO2 and a small amount of crystallization nucleating agents such as Fe2O3, TiO2, ZrO2. After it was heat treated at 855 ℃ for 1 h, the crystal phase of Ca2Al2SiO7 about 1μm could be nucleated and crystallized, which indicates that blast furnace slag has high crystallization activity. Adding 4% of blast furnace slag to ZTA, the mechanical properties of ZTA ceramics are significantly improved at low temperatures after sintered at 1 550 ℃ for 30 min. Flexural strength and fracture toughness are 650 MPa and 6.03 MPa·m1/2, respectively. There are 15% and 14.2% higher than that at the same sintering temperature without addition of blast furnae slag, and the sintering temperature is reduced by more than 50 ℃. The grain-refining furnace slag incorporated ZTA ceramic matrix, the liquid phase produces by blast furnace slag during the sintering process, which promotes the growth of Al2O3 rod crystal, the rod crystal extraction and crack deflection during the process of stress are conducive to the improvement of the mechanical properties of ZTA ceramics. The crystallization of blast furnace slag at high temperature enhances the grain boundary strength of ZTA ceramics and further improves the mechanical properties of the materials. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《矿产保护与利用》浏览原始摘要信息 |
|
点击此处可从《矿产保护与利用》下载免费的PDF全文 |
|
