| 动静轴结构旋翼轴载荷分离仿真分析与试验研究 |
| |
| 引用本文： | 黄湘龙,尹凤,李艳艳,王文凯,赵思波. 动静轴结构旋翼轴载荷分离仿真分析与试验研究[J]. 工程设计学报, 2020, 27(2): 256-262. DOI: 10.3785/j.issn.1006-754X.2020.00.027 |
| |
| 作者姓名： | 黄湘龙 尹凤 李艳艳 王文凯 赵思波 |
| |
| 作者单位： | 1.中国航空发动机集团 湖南动力机械研究所， 湖南 株洲 412002; 2.湖南工贸技师学院 建筑装饰系， 湖南 株洲 412000 |
| |
| 摘 要： | 动静轴结构旋翼轴是一种具有抗弹击能力的新型直升机旋翼轴构型,拟对自主设计的鼓形花键动静轴结构旋翼轴和柔性联轴节动静轴结构旋翼轴进行载荷分离特性研究。利用有限元软件对这2种动静轴结构旋翼轴的载荷分离系数进行仿真分析,并开展多通道加载试验加以验证。结果表明采用7 mm壁厚静轴时动静轴结构旋翼轴的载荷分离系数相比采用4 mm壁厚静轴时明显提高;柔性联轴节动静轴结构旋翼轴的综合载荷分离系数为77.37%,略高于鼓形花键动静轴结构旋翼轴的76.33%。研究结果可为直升机动静轴结构旋翼轴的设计提供指导。
|
| 关 键 词： | 动静轴结构 旋翼轴 载荷分离 多通道 加载试验 |
| 收稿时间： | 2020-04-28 |
Simulation analysis and experimental study on load separation of rotor shaft with dynamic and static axis structure |
| |
| HUANG Xiang-long,YIN Feng,LI Yan-yan,WANG Wen-kai,ZHAO Si-bo. Simulation analysis and experimental study on load separation of rotor shaft with dynamic and static axis structure[J]. Journal of Engineering Design, 2020, 27(2): 256-262. DOI: 10.3785/j.issn.1006-754X.2020.00.027 |
| |
| Authors: | HUANG Xiang-long YIN Feng LI Yan-yan WANG Wen-kai ZHAO Si-bo |
| |
| Affiliation: | (HunanAviation Powerplant Research Institute,Aero Engine Corporation of China,Zhuzhou 412002,China;Department ofArchitecture Decoration,Hunan Technician College of Industry and Commerce,Zhuzhou 412000,China) |
| |
| Abstract: | Rotor shaft with dynamic and static axis structure is a new type of rotor shaft configuration with anti-ballistic capability for the helicopter. It is planned to study the load separation characteristics of independently designed drum-shaped spline rotor shaft and flexible coupling rotor shaft with dynamic and static axis structure. Through the finite element software, the load separation coefficients of two kinds of rotor shafts with dynamic and static axis structures were simulated, and the verifiable multi-channel loading tests were carried out. The results showed that when the wall thickness of static shaft was 7 mm, the load separation coefficient of rotor shaft with dynamic and static axis structure was significantly higher than that when the wall thickness of static shaft was 4 mm.The comprehensive load separation coefficient of flexible coupling rotor shaft with dynamic and static axis structure was 77.37%, which was slightly higher than that of drum-shaped spline rotor shaft with dynamic and static axis structure. The research results provide guidance for the design of rotor shaft with dynamic and static axis structure in the helicopters. |
| |
| Keywords: | dynamic and static axis structure rotor shaft load separation multi-channel loading test |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《工程设计学报》浏览原始摘要信息 |
|
点击此处可从《工程设计学报》下载免费的PDF全文 |
|
