| 300t 顶底复吹转炉氧枪枪位的水模型研究和应用 |
| |
| 引用本文： | 闫心怡,沈明钢,冯超. 300t 顶底复吹转炉氧枪枪位的水模型研究和应用[J]. 特殊钢, 2018, 39(1): 6-8 |
| |
| 作者姓名： | 闫心怡 沈明钢 冯超 |
| |
| 作者单位： | 辽宁科技大学材料与冶金学院，鞍山，114051 |
| |
| 摘 要： | 研究了300t顶底复吹转炉1:10几何相似比的水模型顶枪枪位（150~230mm）和流量（44~48m3/h）对钢液混匀时间的影响。模拟结果得出,最佳枪位为170mm,最佳流量为45m3/h。钢厂300t顶底复吹转炉应用结果表明,顶吹流量60000m3/h和底吹流量1000m3/h时,当顶枪枪位由1900mm改进为1700mm时,碳氧积平均值由原来的27.94降为23.49,提高了转炉内熔池的搅拌效果,吹炼时间由原15.8min降低至15.5min,降低了生产成本。
|
| 关 键 词： | 300t顶底复吹转炉 氧枪枪位 水模型均 混时间 |
| 收稿时间： | 2017-08-10 |
A Study on Oxygen Lance Level for a 300 t Top and Bottom Combined Blowing Converter by a Water Model and Application |
| |
| Yan Xinyi,Shen Mingang,Feng Chao. A Study on Oxygen Lance Level for a 300 t Top and Bottom Combined Blowing Converter by a Water Model and Application[J]. Special Steel, 2018, 39(1): 6-8 |
| |
| Authors: | Yan Xinyi Shen Mingang Feng Chao |
| |
| Affiliation: | School of Materials and Metallurgy, Liaoning University of Science and Technology, Anshan ，114051 |
| |
| Abstract: | The effect of top oxygen lance level (150~230mm) and flow rate (44~48m3/h) of geometric similarity 1：10 water model for 300t top and bottom combined blowing converter on mixing time of liquid has been studied. It is obtained by simulation results that the optimum lance level is 170mm and optimum flow rate is 45m3/h.The application results of 300t top and bottom combined blowing converter show that with top lance flow rate 60000m3/h and bottom blowing flow rate 1000m3/h, as the top lance level modifies to 1700mm from original 1900mm the average carbon and oxygen product decreases to 23.49 from original 27.94, the stirring effect of converter bath increases and the blowing time decreases to 15.5min from original 15.8min to reduce production cost. |
| |
| Keywords: | 300t Top and Bottom Combined Blowing Converter Oxygen Lance Level Water Model Mixing Time |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载免费的PDF全文 |
|
