| TFT光刻平面倾斜对光刻图形的影响及改善 |
| |
| 引用本文： | 张玉虎, 李亚文, 罗传文, 等. TFT光刻平面倾斜对光刻图形的影响及改善[J]. 光电工程, 2019, 46(10): 180679. doi: 10.12086/oee.2019.180679 |
| |
| 作者姓名： | 张玉虎 李亚文 罗传文 李力 曹少波 马小辉 |
| |
| 作者单位： | 合肥京东方光电科技有限公司，安徽 合肥 230012 |
| |
| 摘 要： | 薄膜晶体管光刻制程中，光刻胶光刻平面位置是决定光刻图形质量的关键因素。为了在光刻机最小分辨率条件下改善光刻图形质量，本文从光刻胶内反射光线的反射特点出发，以减小光刻胶内反射光线对非光刻区域的光刻光强及增加光刻区域的光刻胶底部光刻光强为基础，推导出光刻光线倾斜入射光刻胶平面时，光刻胶光刻平面位置调整量的计算公式，并以该公式计算出的调整量对光刻胶光刻平面进行调整。结果表明：对于最小分辨率为3.0 μm的投影光刻机，进行线间距为2.2 μm的产品光刻时，以该公式计算出的调整量对光刻胶光刻平面调整后，较未调整前，光刻图形坡度角提升了13.3%，光刻胶线宽或线间距宽度(DICD)均一性改善了14.7%，光刻图形光刻胶残留得到解决。
|
| 关 键 词： | 光刻机 分辨率 倾斜入射 光刻平面 坡度角 光刻图形 |
| 收稿时间： | 2018-12-22 |
| 修稿时间： | 2019-03-29 |
The effect of TFT lithography plane inclination on lithography pattern and improvement |
| |
| Zhang Yuhu, Li Yawen, Luo Chuanwen, et al. The effect of TFT lithography plane inclination on lithography pattern and improvement[J]. Opto-Electronic Engineering, 2019, 46(10): 180679. doi: 10.12086/oee.2019.180679 |
| |
| Authors: | Zhang Yuhu Li Yawen Luo Chuanwen Li Li Cao Shaobo Ma Xiaohui |
| |
| Affiliation: | Hefei BOE Optoelectronics Technology Co. Ltd, Hefei, Anhui 230012, China |
| |
| Abstract: | In the lithography process of thin film transistor, the lithography plane position of photoresist is the key factor that determine the quality of lithography pattern. In order to improve the quality of lithography pattern under the minimum resolution of lithography machine, the reflection characteristic of the light in the photoresist is studied in this paper, based on reducing the intensity of the reflected light in the photoresist on the non-lithography region and increasing the intensity of the photoresist at the bottom on the lithography region, the computational formula for the lithography plane position adjustment of the photoresist is deduced under the oblique incidence. The adjustment amount is calculated by the formula and the lithography plane is adjusted by the adjustment. The results show that for the projection lithography machine with the minimum resolution of 3.0 μm, and for the product with the line space of 2.2 μm, after adjusting the lithography plane of photoresist with this adjustment, the slope angle of the lithography pattern is increased by 13.3%, and the uniformity of the DICD (development inspection critical dimension) is improved by 14.7%, the photoresist remain of the lithography pattern is resolved. |
| |
| Keywords: | lithography machine resolution oblique incidence lithography plane slope angle lithography pattern |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《光电工程》浏览原始摘要信息 |
|
点击此处可从《光电工程》下载全文 |
