| 悬浮态乳液聚合条件对聚氯乙烯树脂颗粒特性的影响 |
| |
| 引用本文： | 包永忠,魏真理,翁志学,黄志明. 悬浮态乳液聚合条件对聚氯乙烯树脂颗粒特性的影响[J]. 中国化学工程学报, 2003, 11(4): 431-435 |
| |
| 作者姓名： | 包永忠 魏真理 翁志学 黄志明 |
| |
| 作者单位： | StateKeyLaboratoryofPolymerReactionEngineering,ZhejiangUniversity,Hangzhou310027,China |
| |
| 基金项目： | Supported by the National Natural Science Foundation of China (No. 29906009). |
| |
| 摘 要： | Suspended emulsion polymerization of vinyl chloride was carried out in a 5 L autoclave. The influence of agitation, polymerization conversion, dispersant and surfactant on the average particle size (PS) and particle size distribution (PSD), particle morphology and porosity of polyvinyl chloride (PVC) resin was investigated. It showed that the agitator had great influence on the smooth operation of polymerization, PS and PSD. The PS increased and PSD became narrow as polymerization conversion became high. The porosity decreased with the increase of conversion. A convenient choice of additives, both dispersants and non-ionic surfactants, allows one to adjust PS and PSD. The PS decreased with the addition of polyvinyl alcohol or hydroxypropyl methylcellulose dispersants,and increased with the addition of Span surfactants. The addition of dispersants or surfactants also affected the morphology and porosity of resin, and PVC resin with looser agglomeration and homogeneous distribution of primary particles was prepared.
|
| 关 键 词： | 悬浮态 乳液聚合 聚合条件 聚氯乙烯树脂 颗粒特性 影响 PVC |
| 修稿时间： | |
Influence of Suspended Emulsion Polymerization Conditions on Particle Characteristics of Polyvinyl Chloride Resin |
| |
| BAO Yongzhong,WEI Zhenli,WENG Zhixue,HUANG Zhiming. Influence of Suspended Emulsion Polymerization Conditions on Particle Characteristics of Polyvinyl Chloride Resin[J]. Chinese Journal of Chemical Engineering, 2003, 11(4): 431-435 |
| |
| Authors: | BAO Yongzhong WEI Zhenli WENG Zhixue HUANG Zhiming |
| |
| Affiliation: | State Key Laboratory of Polymer Reaction Engineering, Zhejiang University, Hangzhou 310027, China |
| |
| Abstract: | Suspended emulsion polymerization of vinyl chloride was carried out in a 5 L autoclave. The influence of agitation, polymerization conversion, dispersant and surfactant on the average particle size (PS) and particle size distribution (PSD), particle morphology and porosity of polyvinyl chloride (PVC) resin was investigated. It showed that the agitator had great influence on the smooth operation of polymerization, PS and PSD. The PS increased and PSD became narrow as polymerization conversion became high. The porosity decreased with the increase of conversion. A convenient choice of additives, both dispersants and non-ionic surfactants, allows one to adjust PS and PSD. The PS decreased with the addition of polyvinyl alcohol or hydroxypropyl methylcellulose dispersants, and increased with the addition of Span surfactants. The addition of dispersants or surfactants also affected the morphology and porosity of resin, and PVC resin with looser agglomeration and homogeneous distribution of primary particles was prepared. |
| |
| Keywords: | suspended emulsion polymerization vinyl chloride dispersant particle size particle size distribution porosity |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《中国化学工程学报》浏览原始摘要信息 |
|
点击此处可从《中国化学工程学报》下载免费的PDF全文 |
|
