| 基于上位机的层间角联锁织物用织机开口控制系统设计 |
| |
| 引用本文： | 陈小明,李皎,张一帆,谢军波,姚天磊,陈利. 基于上位机的层间角联锁织物用织机开口控制系统设计[J]. 纺织学报, 2022, 43(4): 174-179. DOI: 10.13475/j.fzxb.20200503506 |
| |
| 作者姓名： | 陈小明 李皎 张一帆 谢军波 姚天磊 陈利 |
| |
| 作者单位： | 1.天津工业大学 纺织科学与工程学院, 天津 3003872.天津工业大学 先进纺织复合材料教育部重点实验室, 天津 3003873.天津工业大学 机械工程学院, 天津 300387 |
| |
| 基金项目： | 天津市教委科研计划项目(2018ZD13) |
| |
| 摘 要： | 为解决小批量、多品种层间角联锁织物织造经常需要更改自动化开口控制程序的问题,提出一种基于上位机的织机开口控制系统,主要包括数据格式转换计算机辅助制造(CAM)软件模块、上位机通信系统和可编程控制器(PLC)控制系统.首先,基于Python和QT-Designer构建工艺信息数据格式转换CAM软件;同时,利用Visual...
|
| 关 键 词： | 上位机 层间角联锁织物 织机 预制体 可编程控制器 |
| 收稿时间： | 2020-05-18 |
Design of loom shedding control system for interlayer angle interlocking fabric based on use of host computer |
| |
| CHEN Xiaoming,LI Jiao,ZHANG Yifan,XIE Junbo,YAO Tianlei,CHEN Li. Design of loom shedding control system for interlayer angle interlocking fabric based on use of host computer[J]. Journal of Textile Research, 2022, 43(4): 174-179. DOI: 10.13475/j.fzxb.20200503506 |
| |
| Authors: | CHEN Xiaoming LI Jiao ZHANG Yifan XIE Junbo YAO Tianlei CHEN Li |
| |
| Affiliation: | 1. School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China2. Key Laboratory of Advanced Textile Composite, Ministry of Education, Tiangong University, Tianjin 300387, China3. School of Mechanical Engineering, Tiangong University, Tianjin 300387, China |
| |
| Abstract: | Aiming at the problem that the weaving of small batch and multi-type interlayer angle interlocking fabrics needs frequent change of the automatic weaving shedding control program, this paper proposes an loom shedding control system based on the host computer, including data format conversion computer aided manufacturing(CAM)software, host computer communication system and programmable logical controller(PLC) control system. The host computer communication system was firstly designed and a process information data format conversion CAM software module was built based on Python and QT-Designer. Further, a PLC host computer communication software was developed based on Visual Basic to facilitate real-time transmission of process information to the PLC, and monitor the production process. The hardware and software design of PLC control system, and experimental verification of the feasibility of the control system of jacquard loom were carried out based on the use of the host computer. The research results show that the process information data format conversion CAM software module, host computer communication software and PLC control system developed in this research were feasible. The cylinder motion matrix file was edited through Excel and then copied into the host computer to complete the data format conversion and complete the control program change. |
| |
| Keywords: | host computer interlayer angle interlocking fabric loom preform programmable logical controller |
|
| 点击此处可从《纺织学报》浏览原始摘要信息 |
|
点击此处可从《纺织学报》下载全文 |
|
