Numerical Analysis of Heat Transfer and Nanofluid Flow in a Triangular Duct with Vortex Generator: Two‐Phase Model |
| |
| Authors: | Hamdi E. Ahmed M.Z. Yusoff M.N.A. Hawlader M.I. Ahmed |
| |
| Affiliation: | 1. Department of Mechanical Engineering, University of Anbar, Anbar, Iraq;2. Centre for Advanced Computational Engineering, Universiti Tenaga Nasional, Selangor, Malaysia;3. Department of Mechanical Engineering, Islamic International University Malaysia, Gombak, Malaysia |
| |
| Abstract: | Laminar forced convection heat transfer and nanofluids flow in an equilateral triangular channel using a delta‐winglet pair of vortex generators is numerically studied. Three nanofluids, namely; Al2O3, CuO, and SiO2 nanoparticles suspended in an ethylene glycol base fluid are examined. A two‐phase mixture model is considered to simulate the governing equations of mass, momentum and energy for both phases and solved using the finite volume method (FVM). Constant and temperature dependent properties methods are assumed. The single‐phase model is considered here for comparison. The nanoparticle concentration is assumed to be 1% and 4% and Reynolds number is ranged from 100 to 800. The results show that the heat transfer enhancement by a using vortex generator and nanofluids is greater than the case of vortex generator and base fluid only, and the latest case provided higher enhancement of heat transfer compared to the case of a base fluid flowing in a plain duct. Considering the nanofluid as two separated phases is more reasonable than assuming the nanofluid as a homogeneous single phase. Temperature dependent properties model provided higher heat transfer and lower shear stress than the constant properties model. |
| |
| Keywords: | heat transfer nanofluid triangular duct vortex generator two‐phase |
|
|
