| 不同制备方法对MgFe氧化物催化吸附SO2性能的影响 |
| |
| 引用本文： | 陈银飞,葛忠华,吕德伟. 不同制备方法对MgFe氧化物催化吸附SO2性能的影响[J]. 化工学报, 2001, 52(5): 429-433 |
| |
| 作者姓名： | 陈银飞 葛忠华 吕德伟 |
| |
| 作者单位： | 浙江工业大学化工学院; 浙江大学材料与化工学院 |
| |
| 摘 要： | 用不同的制备方式得到了 3种MgFe复合氧化物和混合物 ,即机械混合的Fe2O3 +MgO ;以MgO为载体 ,浸渍法制备的Fe2O3 /MgO ;以MgFe水滑石类为前驱体 ,经焙烧制得MgFeOx.分别测定了 3种材料对SO2 氧化吸附的速率和硫容量 ,发现MgFeOx 脱硫性能最好 ,硫容量达到 1.4gSO2/g吸附剂 .通过BET、XRD和IR的表征 ,分析了材料脱硫性能好的原因 .主要是高度分散状态的MgFeOx 中Mg和Fe的协同作用 ,Fe起到了催化氧化的作用 ,Mg是吸附中心 ,氧化和吸附的耦合加快了MgFeOx 对SO2 的吸附速率 ,增加了硫容量
|
| 关 键 词： | 复合氧化物 二氧化硫 氧化 吸附 脱硫 氧化锰 氧化铁 催化性能 固体催化氧化剂 制备 |
| 文章编号： | 0438-1157(2001)05-0429-05 |
| 修稿时间： | 2000-06-06 |
MgFe COMPLEX OXIDES FOR SO2 OXIDATIVE ADSORPTION |
| |
| CHEN Yinfei,GE Zhonghua,LV Dewei. MgFe COMPLEX OXIDES FOR SO2 OXIDATIVE ADSORPTION[J]. Journal of Chemical Industry and Engineering(China), 2001, 52(5): 429-433 |
| |
| Authors: | CHEN Yinfei GE Zhonghua LV Dewei |
| |
| Abstract: | Three kinds of complex oxides and mixed oxide were prepared with different methods, MgO mixed simply with Fe2O3,Fe2O3 loaded on MgO with impregnation,and MgFeOx calcined on the MgFe hydrotalcite.The desulfuration rates and the sulfur capacities of the materials were measured. It was found that MgFeOx showed the best performance and its sulfur capacity exceeded 1.4 g SO2/g material. The reason for high rate and capacity was analyzed from BET data, XRD and IR spectra. The synergistic action of Mg and Fe dispersed uniformly in complex oxide , in which Fe was the oxidizing center and Mg was the adsorbing center , speeded up the desulfuration rate and increased the sulfur capacity. |
| |
| Keywords: | complex oxide sulfur dioxide oxidation adsorption desulfurization |
| 本文献已被 维普 等数据库收录！ |
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载免费的PDF全文 |
|
