| 塑料齿轮注塑模设计及成型工艺分析与优化 |
| |
| 引用本文： | 蒋昌华. 塑料齿轮注塑模设计及成型工艺分析与优化[J]. 上海第二工业大学学报, 2019, 0(1): 48-52 |
| |
| 作者姓名： | 蒋昌华 |
| |
| 作者单位： | 上海第二工业大学高等职业技术(国际)学院 |
| |
| 基金项目： | 上海第二工业大学校基金项目(EGD17XQD08) 资助 |
| |
| 摘 要： | 翘曲变形是影响塑料齿轮传动精度的最大因素。为获得最小变形量,结合注塑成型数值模拟和正交试验设计、极差分析,得到最优工艺参数方案,满足塑件使用要求;用三维软件完成了齿轮注塑模具的总装结构设计,阐述了三板模自动脱模的模具工作过程。
|
| 关 键 词： | 塑料齿轮 成型工艺优化 正交实验 极差分析 自动脱模 |
Design of Injection Mould, Analysis and Optimization onMolding Process for Plastic Gear |
| |
| JIANG Chang-hua. Design of Injection Mould, Analysis and Optimization onMolding Process for Plastic Gear[J]. Journal of Shanghai Second Polytechnic University, 2019, 0(1): 48-52 |
| |
| Authors: | JIANG Chang-hua |
| |
| Affiliation: | College of International Vocational Education, Shanghai Polytechnic University, Shanghai 201209, China |
| |
| Abstract: | Warpage deformation is the biggest factor affecting the transmission accuracy of plastic gears. In order to obtain the minimumdeformation, combined with numerical simulation of injection moulding, orthogonal experimental design and range analysis, the optimumprocess parameters were obtained to meet the requirements of plastic parts. The assembly structure design of gear injection mouldswas completed with three-dimensional software, and the working process of three-plate moulds automatic demoulding was described. |
| |
| Keywords: | plastic gear forming process optimization orthogonal experiment range analysis automatic demoulding |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海第二工业大学学报》浏览原始摘要信息 |
|
点击此处可从《上海第二工业大学学报》下载全文 |
