首页 | 本学科首页   官方微博 | 高级检索  
     

成像激光雷达测量大气能见度实验研究
引用本文:孙国栋,秦来安,程知,何枫,侯再红. 成像激光雷达测量大气能见度实验研究[J]. 红外与激光工程, 2017, 46(10): 1030003-1030003(9). DOI: 10.3788/IRLA201766.1030003
作者姓名:孙国栋  秦来安  程知  何枫  侯再红
作者单位:1.中国科学院合肥物质科学研究院 安徽光学精密机械研究所大气成分与光学重点实验室,安徽 合肥 230031;
基金项目:国家自然科学基金(41405014)
摘    要:针对传统的后向散射激光雷达系统结构复杂和需要几何因子矫正的情况,研制了一套可以全天候测量的成像激光雷达用以克服这些缺陷。采用基于求解消光系数分布的方法反演能见度,提出一种Klett后向积分法与遗传算法相结合的改进的迭代算法,同时用传统的斜率法和权重拟合法求得能见度。选取比较有代表性的四种天气,多云、阴天、晴天和雨天的数据进行处理,得到这四种天气情况下的能见度。将这四组能见度数据与能见度仪器Belfort 6230A在这四天同时测得的能见度数据进行对比,结果表明,在不同的天气情况下,两种仪器测得的数据趋势相同,相关系数均在0.67以上,具有较强的相关性。可以得出结论:研制的成像激光雷达系统可用于探测大气的能见度。

关 键 词:成像激光雷达   消光系数   大气能见度   遗传算法
收稿时间:2017-02-05

Experimental research of atmospheric visibility measured by imaging lidar
Affiliation:1.Key Laboratory of Atmospheric Composition and Optical Radiation,Anhui Institute of Optics and Fine Mechanics,Hefei Institutes of Physical Sciences,Chinese Academy of Sciences,Hefei 230031,China;2.University of Science and Technology of China,Hefei 230026,China
Abstract:Traditional backscattering lidar has complex system and requirement to correct the geometrical factor. Using imaging lidar can overcome these drawbacks and this lidar can work all the day. It adopted the weighted fitting method, slope method and modified iteration algorithm that combined Klett backward integration method and Genetic Algorithm(GA) method based on the distribution of extinction to deal with the image data. Taking the data from four different weathers, the atmospheric visibility of these days was obtained. Then, it was made a confrontation with the America Belfort model 6230A visibility meter. It can achieve from this process that the differences of visibility between two facilities were on the small side and had the high correlation coefficients over 0.67. Finally, it can reach a conclusion that this imaging lidar system can be a new instrument to measure the atmospheric visibility.
Keywords:
点击此处可从《红外与激光工程》浏览原始摘要信息
点击此处可从《红外与激光工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号