首页 | 本学科首页   官方微博 | 高级检索  
     

双通道热红外标准辐亮度计定标方法研究
引用本文:谢臣瑜,李健军,庞伟伟,夏茂鹏,郑小兵. 双通道热红外标准辐亮度计定标方法研究[J]. 红外与激光工程, 2018, 47(4): 404002-0404002(7). DOI: 10.3788/IRLA201847.0404002
作者姓名:谢臣瑜  李健军  庞伟伟  夏茂鹏  郑小兵
作者单位:1.中国科学院安徽光学精密机械研究所 通用光学定标与表征技术重点实验室,安徽 合肥 230031;
基金项目:国家自然科学基金(11204318,61275173);国家高技术研究发展计划(2015AA123702)
摘    要:黑体辐射源作为初级标准,其辐射特性的测量精度决定了整个标准传递链路的不确定度。为了提高黑体的辐亮度测量精度,研制了一台可直接观测黑体辐亮度的双通道热红外标准辐亮度计。根据仪器的工作原理,采用自行研制的高精度水浴黑体获取标准辐亮度计的定标系数。实验结果表明,该辐亮度计的1 h信号非稳定性优于0.3%,定标系数拟合不确定度优于1.23%,5 m通道整体不确定度为0.39%,10 m通道整体不确定度为1.3%。可实现黑体辐亮度与实验室辐射标准之间的传递。

关 键 词:黑体辐射   热红外   红外辐亮度计   定标
收稿时间:2017-11-10

Reseach on calibration method of double-channel thermal-infrared standard radiometer
Affiliation:1.Key Laboratory of Optical Calibration and Characterization,Anhui Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Hefei 230031,China;2.University of Science and Technology of China,Hefei 230026,China
Abstract:Blackbody radiation source as a primary standard, its measurement accuracy determines the uncertainty level of the whole traceability link. To improve the measurement accuracy of blackbodies' radiance, a double-channel thermal-infrared standard radiometer was developed. According to the principle of the instrument, calibration coefficients of the standard radiometer were obtained by using a high accuracy water-bath blackbody. Experimental results suggest that the radiometer's instability is less than 0.3% within one hour, uncertainty of fitting coefficient is less than 1.23%, and combined uncertainty is less than 0.39%, 1.3% in 5 m and 10 m channel respectively. This radiometer provides new means for tracing blackbody radiance directly to radiant standard in lab.
Keywords:
点击此处可从《红外与激光工程》浏览原始摘要信息
点击此处可从《红外与激光工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号