| 高疏水氟化SiO2/聚醚砜复合膜的制备与表征 |
| |
| 引用本文： | 李颖娜,李悦,孟丽聪,叶卉,张玉忠,徐行健. 高疏水氟化SiO2/聚醚砜复合膜的制备与表征[J]. 复合材料学报, 2019, 36(3): 715-722. DOI: 10.13801/j.cnki.fhclxb.20180821.006 |
| |
| 作者姓名： | 李颖娜 李悦 孟丽聪 叶卉 张玉忠 徐行健 |
| |
| 作者单位： | 1.唐山学院 环境与化学工程系, 唐山 063000; |
| |
| 基金项目： | 国家自然科学青年基金（51503146）；河北省科技计划项目（13273707；16211243；18271238）；河北省唐山市科技计划项目（14130238B；18130221a）；唐山学院项目（hhx2018003） |
| |
| 摘 要： | 以正硅酸乙酯（TEOS）和全氟癸基三乙氧基硅烷（PFDTES）为混合Si源，以聚醚砜（PES）为基膜材料，通过真空过滤和热处理工艺制备单侧高疏水氟化SiO2/PES（fSiO2/PES）复合膜。通过ATR-FTIR、XPS、TEM和FESEM等对单侧高疏水fSiO2/PES复合膜进行表征，考察PFDTES修饰量和热处理条件对膜疏水性能的影响，并评价fSiO2/PES复合膜的疏水稳定性能。结果表明，当PFDTES:TEOS的质量比为3时，高疏水fSiO2/PES复合膜的疏水性能较好（接触角为131.5°）；当热处理温度为100℃，热处理时间为4 h时，高疏水fSiO2/PES复合膜表面的接触角为138.9°，且其对不同pH值的溶液都有良好的疏水性能。
|
| 关 键 词： | 聚醚砜 SiO2 复合膜 单侧 高疏水 |
| 收稿时间： | 2018-04-20 |
Synthesis and properties of highhydrophobic fluorinated SiO2/poly(ether sulfone) composite membrane |
| |
| LI Yingna,LI Yue,MENG Licong,YE Hui,ZHANG Yuzhong,XU Xingjian. Synthesis and properties of highhydrophobic fluorinated SiO2/poly(ether sulfone) composite membrane[J]. Acta Materiae Compositae Sinica, 2019, 36(3): 715-722. DOI: 10.13801/j.cnki.fhclxb.20180821.006 |
| |
| Authors: | LI Yingna LI Yue MENG Licong YE Hui ZHANG Yuzhong XU Xingjian |
| |
| Affiliation: | 1.Department of Environmental and Chemical Engineering, Tangshan College, Tangshan 063000, China;2.School of Materials Science and Engineering, Tianjin Polytechnic University, Tianjin 300387, China;3.State Key Laboratory of Separation Membranes and Membrane Processes, Tianjin Polytechnic University, Tianjin 300387, China;4.Hongquanxili Primary School, Tangshan 063000, China |
| |
| Abstract: | A single-side highhydrophobic fluorinated silica/poly(ether sulfone) (fSiO2/PES) composite membrane was prepared by vacuum-filtrating with tetraethoxysilian (TEOS) and perfluorodecyltriethoxysilane (PFDTES) as the silica source. The chemical component and morphology of the single-side highhydrophobic fSiO2/PES composite membrane was examined by ATR-FTIR, XPS, TEM and FESEM, individually. The effects of PFDTES modification amount and the heat treatment condition on membrane hydrophobicity were investigated, and the hydrophobic stability of fSiO2/PES composite membrane was evaluated. The results show that the water contact angle of the single-side highhydrophobic fSiO2/PES composite membrane is 131.5° when the mass ratio of PFDTES:TEOS is 3. The water contact angle of the single-side highhydrophobic fSiO2/PES composite membrane is 138.9°, as the heat treatment temperature is 100℃ and the heat treatment time is 4 h. In addition, the single-side highhydrophobic fSiO2/PES composite membrane exhibits excellent hydrophobic stable performance. |
| |
| Keywords: | poly(ether sulfone) SiO2 composite membrane single-side highhydrophobic |
|
| 点击此处可从《复合材料学报》浏览原始摘要信息 |
|
点击此处可从《复合材料学报》下载免费的PDF全文 |
|
