首页 | 本学科首页   官方微博 | 高级检索  
     

还原温度对氧化石墨烯的湿度-甲醛交叉敏感性能的影响
引用本文:雷德会,彭同江,孙红娟,汤光平,杨建召,任亚周,王丽丽. 还原温度对氧化石墨烯的湿度-甲醛交叉敏感性能的影响[J]. 化工学报, 2019, 70(1): 309-318. DOI: 10.11949/j.issn.0438-1157.20180681
作者姓名:雷德会  彭同江  孙红娟  汤光平  杨建召  任亚周  王丽丽
作者单位:1. 西南科技大学理学院,四川 绵阳 6210102. 西南科技大学固体废物处理与资源化教育部重点实验室,四川 绵阳 6210103. 西南科技大学矿物材料及应用研究所,四川 绵阳 6210104. 中国工程物理研究院机械制造工业研究所,四川 绵阳 621900
基金项目:国家自然科学基金项目(U1630132, 41772036);四川省科技厅项目(2016GZ0428, 2017GZ0114);西南科技大学研究生创新基金(17ycx072)
摘    要:以氧化石墨烯溶胶为前体,通过旋涂工艺制备薄膜型气敏元件,在低温80~180℃下进行热处理,获得系列不同还原程度的还原氧化石墨烯气敏元件,采用XRD、AFM、FT-IR、XPS对样品的层结构、薄膜厚度及含氧官能团变化属性进行表征,将气敏薄膜元件在相对湿度为11.3%~93.6%的范围内进行预湿处理,并测定元件对甲醛气氛的敏感性能。结果表明:随热还原处理温度的升高,氧化石墨烯的结构逐渐向类石墨结构转变,含氧官能团逐渐脱失,缺陷增多,薄膜的方块电阻呈数量级地减小,从41 MΩ减小至928 Ω;经不同湿度预处理的气敏元件置于甲醛气氛中产生了水分子与甲醛分子的竞争吸附,从而导致电阻的明显变化;在10?4甲醛气氛下,未还原或热还原温度较低的气敏元件适用于低、高湿环境下甲醛气氛的气敏测试,最大灵敏度为69.1%,而还原温度适中的元件则适用于中湿环境的甲醛测试,最大灵敏度为80.3%。

关 键 词:氧化石墨烯  还原  含氧官能团  化学分析  吸附  脱附  交叉灵敏  
收稿时间:2018-06-21
修稿时间:2018-10-15

Influence of reduction temperature of graphene oxide on cross sensitivity between humidity and formaldehyde
Dehui LEI,Tongjiang PENG,Hongjuan SUN,Guangping TANG,Jianzhao YANG,Yazhou REN,Lili WANG. Influence of reduction temperature of graphene oxide on cross sensitivity between humidity and formaldehyde[J]. Journal of Chemical Industry and Engineering(China), 2019, 70(1): 309-318. DOI: 10.11949/j.issn.0438-1157.20180681
Authors:Dehui LEI  Tongjiang PENG  Hongjuan SUN  Guangping TANG  Jianzhao YANG  Yazhou REN  Lili WANG
Abstract:As precursors, graphite oxide samples are exfoliated and used to prepare graphene oxide thin films by gas spin coating with Ag-Pd integrated electronic device (Ag-Pd IED). The graphene oxide thin films are annealed at 80—180℃ to obtain a series of reduced graphene oxide gas sensing element samples with different reduction degrees, and the layer structures, film thickness and functional groups change properties of all the samples are investigated by X-ray diffraction spectroscopy, Fourier transform infrared spectroscopy, Atomic force microscope and X-ray photoelectron spectroscopy. The prehumidification treatment with the relative humidity from 11.3% to 93.6%, the gas sensitivity tests are carried out to reduced graphene oxide thin film gas sensing element. Then the formaldehyde gas sensing measurement are also implemented. The results show that the structure of the graphene oxide samples are transformed to the graphitic structure after reduction at different thermal treatment temperatures. The oxygen functional groups on the surface of graphene oxide gradually pyrolyzed, the defects increase, the structure of graphene gradually changes to similar to graphite, and the resistance of the samples were significantly reduced in magnitude with 41 MΩ to 928 Ω. The samples with different relative humidity pretreated produced competitive adsorption of water molecules and formaldehyde molecules in formaldehyde atmosphere, leading to obvious changes in resistance. When exposed to the 10?4 formaldehyde gas at room temperature, unreduced or the reduced products at low temperature show good sensitivity of 69.1% to formaldehyde gas in high humidity environment. In medium humidity environment, the reduced products at medium temperature which exhibit a best sensitivity of 80.3% are suitable for the test of formaldehyde gas.
Keywords:graphene oxide  reduction  oxygen-containing functional groups  chemical analysis  adsorption  desorption  cross sensitivity  
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号