| 热化学复合吸附储热循环的理论及实验 |
| |
| 引用本文： | 闫霆,王如竹,李廷贤. 热化学复合吸附储热循环的理论及实验[J]. 化工学报, 2016, 67(Z2): 311-317. DOI: 10.11949/j.issn.0438-1157.20161414 |
| |
| 作者姓名： | 闫霆 王如竹 李廷贤 |
| |
| 作者单位： | 1. 上海电力学院能源与机械工程学院, 上海 200090;2. 上海交通大学制冷与低温工程研究所, 上海 200240 |
| |
| 基金项目： | 国家自然科学基金项目（51276211）。 |
| |
| 摘 要： | 对一种基于固-气可逆化学反应的热化学复合吸附储热循环的储热特性以及能量品位提升性能进行了理论分析，并以MnCl2/SrCl2/NH3作为工质对进行了实验研究。理论分析表明，热化学复合吸附储热循环不仅可以降低外界驱动热源的温度并保证输出热能温度稳定，而且能大幅度地提升输出热能的温度品位。在MnCl2和SrCl2都参与放热的实验工况下，获得的储热效率为93.31%。MnCl2复合吸附剂的总储热密度按单位质量反应盐MnCl2和单位质量的固化吸附剂计量分别为4393.36和3734.36 kJ·kg-1；SrCl2复合吸附剂的总储热密度按单位质量反应盐SrCl2和单位质量的固化吸附剂计量分别为1947.28和1655.19 kJ·kg-1。结果表明，热化学储热是一种相当有潜力的储热方式，可为低品位热能的高效回收利用提供强有力的技术支持。
|
| 关 键 词： | 热化学复合吸附储热 能量品位提升 吸附 再吸附 解吸 储热密度 回收 |
| 收稿时间： | 2016-10-08 |
| 修稿时间： | 2016-10-16 |
Theoretical analysis and experiment of thermochemical composite sorption heat storage cycle |
| |
| YAN Ting,WANG Ruzhu,LI Tingxian. Theoretical analysis and experiment of thermochemical composite sorption heat storage cycle[J]. Journal of Chemical Industry and Engineering(China), 2016, 67(Z2): 311-317. DOI: 10.11949/j.issn.0438-1157.20161414 |
| |
| Authors: | YAN Ting WANG Ruzhu LI Tingxian |
| |
| Affiliation: | 1. College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai 200090, China;2. Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, Shanghai 200240, China |
| |
| Abstract: | A novel thermochemical composite sorption heat storage cycle was described using reversible solid-gas chemical reaction.The thermal energy storage and energy upgrade characteristics for the low-grade thermal energy was analyzed theoretically.Meanwhile,the experimental research was carried out by employing the MnCl2/SrCl2/NH3 as the working pair.The theoretical analysis suggested the thermochemical composite sorption heat storage cycle not only reduces the driving temperature of external heat source,but also can enhance significantly energy upgrade capacity compared to the thermochemical adsorption heat storage cycle.Compared to the thermochemical resorption energy storage cycle,it can provide the stable heat output temperature and further improve the thermal energy grade.Under the operation condition of charging temperature of 135℃ for the desorption of MnCl2 and temperature of 12℃ for the adsorption of SrCl2,desorption temperature of 90℃ for the regeneration of SrCl2,condensation/evaporation temperature of 12℃,discharging temperature of 40℃ for MnCl2 and SrCl2,the obtained thermal energy storage efficiency is 93.31%.The heat storage density of MnCl2-based composite sorbents is 4393.36 kJ·kg-1 MnCl2 or 3734.36 kJ·kg-1 composite sorbents.Meanwhile,the heat storage density of SrCl2-based composite sorbents is 1947.28 kJ·kg-1 SrCl2 or 1655.19 kJ·kg-1 composite sorbents.The heat storage density of materials is as 10 to 20 times as that of the sensible heat storage and phase change heat storage materials.Therefore,thermochemical composite sorption heat storage is feasible and a very potential way in storing heat.It can be used for recovering the low-grade thermal energy to promote the highly efficient utilization of thermal energy. |
| |
| Keywords: | thermochemical composite sorption heat storage energy upgrade adsorption resorption desorption heat storage density recovery |
|
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载免费的PDF全文 |
|
