| 双列螺旋槽液膜密封的相变流动特性 |
| |
| 引用本文： | 曹生照,常涛,郝木明,孙鑫晖,王增丽,任宝杰. 双列螺旋槽液膜密封的相变流动特性[J]. 中国机械工程, 2022, 33(1): 45-53. DOI: 10.3969/j.issn.1004-132X.2022.01.005 |
| |
| 作者姓名： | 曹生照 常涛 郝木明 孙鑫晖 王增丽 任宝杰 |
| |
| 作者单位： | 1.中国石油大学（华东）新能源学院，青岛，2665802.西安航天动力研究所，西安，7101003.东营海森密封技术有限责任公司，东营，257067 |
| |
| 基金项目： | 国家重点研发计划（2020YFB2010000）；国家自然科学基金（51975585） |
| |
| 摘 要： | 为研究高速、低温工况下的液膜密封气液两相流现象,基于均相流体理论,构建了液膜密封相变模型,分析了流体膜两相流动特性和工况参数对相态转变的影响.结果表明:流动空间发散是槽区相变的主要因素,相变的吸热散热导致温度场显著变化;转速升高时,流体动压增强,温度升高,相变范围扩展,相变速率增大;介质温度升高使流体动压减弱,汽化吸热...
|
| 关 键 词： | 两相机械密封 气液两相流 均相流体 热效应 |
Phase Change Flow Characteristics of Double-row Spiral Groove Liquid Film Seals |
| |
| CAO Shengzhao,CHANG Tao,HAO Muming,SUN Xinhui,WANG Zengli,REN Baojie. Phase Change Flow Characteristics of Double-row Spiral Groove Liquid Film Seals[J]. China Mechanical Engineering, 2022, 33(1): 45-53. DOI: 10.3969/j.issn.1004-132X.2022.01.005 |
| |
| Authors: | CAO Shengzhao CHANG Tao HAO Muming SUN Xinhui WANG Zengli REN Baojie |
| |
| Affiliation: | 1.College of New Energy,China University of Petroleum(East China),Qingdao,Shandong,2665802.Xi'an Aerospace Propulsion Institute,Xi'an, 7101003.Dongying Hiscien Sealing Technology Co.,Ltd.,Dongying,Shandong,257067 |
| |
| Abstract: | In order to study the gas-liquid two-phase flow phenomenon of liquid film seals under high-speed and low-temperature working conditions, a phase change model of liquid film seals was constructed based on the theory of homogeneous fluid, and two-phase flow characteristics of the fluid films and effects of operating parameters on phase change were analyzed. The results show that the divergence of the flow spaces is the main factor of the phase change of groove zones. The temperature field changes significantly due to heat absorption and heat dissipation of phase changes. With the increase in speed, the fluid dynamic pressure increases and the temperature rises, the phase change range expands and the phase change rate increases. The increase of the medium temperature weakens the fluid dynamic pressure, and the increase of vapor heat absorption and the decrease of viscosity heat dissipation are the reasons for the fluid cooling on the end surfaces. |
| |
| Keywords: | two-phase mechanical seal gas-liquid two-phase flow homogeneous fluid thermal effect |
|
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载免费的PDF全文 |
|
