| 热带钢轧机线性变凸度工作辊的研制及应用 |
| |
| 引用本文： | 何安瑞,杨荃,陈先霖,赵林,董浩然,徐延强. 热带钢轧机线性变凸度工作辊的研制及应用[J]. 机械工程学报, 2008, 44(11): 255-259. DOI: 10.3901/JME.2008.11.255 |
| |
| 作者姓名： | 何安瑞 杨荃 陈先霖 赵林 董浩然 徐延强 |
| |
| 作者单位： | 北京科技大学高效轧制国家工程研究中心,北京,100083;鞍山钢铁集团公司热轧带钢厂,鞍山,114021 |
| |
| 基金项目： | 国家"九五"重大技术装备研制资助项目 |
| |
| 摘 要： | 为改善轧机的板形调控性能，在分析连续变凸度(Continuously variable crown，CVC)辊形技术的板形控制特性的基础上，开发出用于热带钢轧机的线性变凸度(Linearly variable crown，LVC)工作辊辊形技术及其相应的板形控制模型。LVC技术的板形调节能力与窜辊量成线性关系，同时与带钢宽度成近似线性关系。在满足宽带钢板形控制要求的同时，提高轧机对窄带钢的板形控制能力，使轧制各种规格带钢时所需弯辊力处于合理的的幅值。在1 700 mm热带钢轧机上一年多的工业应用表明，采用LVC工作辊后，板形控制精度提高30%以上，尤其是轧制高强度钢种时，凸度下降显著，轧制公里数一般都大于55 km，磨损辊形和轧辊消耗与常规工作辊基本一致。
|
| 关 键 词： | 热带钢轧机 板形控制 工作辊 辊形 |
Development and Application of Linearly Variable Crown Work Roll in Hot Strip Mills |
| |
| HE Anrui,YANG Quan,CHEN Xianlin,ZHAO Lin,DONG Haoran,XU Yanqiang. Development and Application of Linearly Variable Crown Work Roll in Hot Strip Mills[J]. Chinese Journal of Mechanical Engineering, 2008, 44(11): 255-259. DOI: 10.3901/JME.2008.11.255 |
| |
| Authors: | HE Anrui YANG Quan CHEN Xianlin ZHAO Lin DONG Haoran XU Yanqiang |
| |
| Affiliation: | National Engineering Research Center for Advanced Rolling Technology, University of Science and Technology Beijing Hot Strip Plant, Anshan Iron & Steel Group Company |
| |
| Abstract: | In order to improve profile and flatness performance of rolling mill,linearly variable crown(LVC)work roll of hot s trip mills and its relevant shape control models are developed on the basis of full understanding of shape control characteristics of continuously variable crown(CVC)technology.Shape adjustment capacity of LVC technology varies linearly with roll axial s hiring and it also has approximately linear relationship with strip width.Besides meeting the need of shape control of wide strip,LVC technol... |
| |
| Keywords: | Hot strip mills Profile and flatness control Work roll Roll contour |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机械工程学报》浏览原始摘要信息 |
|
点击此处可从《机械工程学报》下载全文 |
|
