| 原竹材料抗弯性能试验研究 |
| |
| 引用本文： | 刘鹏程,周期石,田杰夫,张海,李威,付飞扬. 原竹材料抗弯性能试验研究[J]. 建筑科学与工程学报, 2021, 0(4): 101-109. DOI: 10.19815/j.jace.2021.03041 |
| |
| 作者姓名： | 刘鹏程 周期石 田杰夫 张海 李威 付飞扬 |
| |
| 作者单位： | (中南大学 土木工程学院,湖南 长沙 410075) |
| |
| 摘 要： | 开展了原竹材料抗弯性能试验,探究了竹材抗弯强度和弹性模量与高度、壁厚、周长的关系,采用Bootstrap法分析了竹材抗弯强度标准值,基于可靠度理论研究了原竹材料的抗弯强度设计值.结果表明:竹片抗弯加载经历较长的弹性阶段,塑性阶段较短,竹材抗弯承载力随高度增加而减小;竹片抗弯强度和弹性模量随高度增加而增大,随壁厚和周长增...
|
| 关 键 词： | 原竹 抗弯性能 Bootstrap法 可靠度理论 |
Experimental Study on Bending Resistance of Original Bamboo Material |
| |
| LIU Peng-cheng,ZHOU Qi-shi,TIAN Jie-fu,ZHANG Hai,LI Wei,FU Fei-yang. Experimental Study on Bending Resistance of Original Bamboo Material[J]. Journal of Architecture and Civil Engineering, 2021, 0(4): 101-109. DOI: 10.19815/j.jace.2021.03041 |
| |
| Authors: | LIU Peng-cheng ZHOU Qi-shi TIAN Jie-fu ZHANG Hai LI Wei FU Fei-yang |
| |
| Affiliation: | (School of Civil Engineering, Central South University, Changsha 410075, Hunan, China) |
| |
| Abstract: | The bending resistance test of the original bamboo material was carried out, the relationship between the bending strength, elastic modulus of bamboo and the height, wall thickness, and circumference was explored. The Bootstrap method was used to analyze the standard value of bending strength of bamboo. Based on the reliability theory, the design value of bending strength of the original bamboo material was calculated. The results show that the bending loading of bamboo slices goes through a longer elastic stage, and the plastic stage is shorter. The bending bearing capacity of bamboo decreases with the increase of height. The bending strength and elastic modulus of bamboo slices increase with the increase of height, and decrease with the increase of the wall thickness and circumference. The bending strength and elastic modulus of bamboo have good goodness of fit with height, wall thickness and circumference. The fitting formula can predict the mechanical properties of bamboo. The number of samples has a significant impact on the sampling error of the bending strength of bamboo. The standard value of the Bootstrap re-sampling method can effectively reduce the error. The standard value of original bamboo material strength obtained by the method for 10 000 re-sampling analysis is 126.75 MPa. The reliability index β increases with the increase of the resistance sub-factor γR and the load ratio ρ. When the load ratio ρ>0, the resistance sub-factor γR under target reliability in the case of dead load + snow load is the largest, and is the smallest in the case of dead load + office floor live load. The calculated bending strength design values of the original bamboo material under the three safety levels are 27.670, 29.884, 32.084 MPa respectively. |
| |
| Keywords: | bamboo bending resistance Bootstrap method reliability theory |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《建筑科学与工程学报》浏览原始摘要信息 |
|
点击此处可从《建筑科学与工程学报》下载免费的PDF全文 |
|
