| 直接空冷凝汽器翅片管污垢层清洗的数值研究 |
| |
| 引用本文： | 王建江,李涛,景雪晖,王升龙,宋和豫疆,李骥,张斯文. 直接空冷凝汽器翅片管污垢层清洗的数值研究[J]. 化工进展, 2016, 35(Z2): 99-102. DOI: 10.16085/j.issn.1000-6613.2016.s2.016 |
| |
| 作者姓名： | 王建江 李涛 景雪晖 王升龙 宋和豫疆 李骥 张斯文 |
| |
| 作者单位： | 1. 国网新疆电力公司电力科学研究院, 新疆 乌鲁木齐 830011;2. 东北电力大学能源与动力工程学院, 吉林 吉林 132012 |
| |
| 摘 要： | 直接空冷凝汽器翅片管作为空冷单元的重要换热组件，翅片管的清洁程度直接影响空冷单元的高效换热能力。目前对如何提高直接空冷凝汽器翅片管换热能力的研究较多，但是对于直接空冷凝汽器翅片管粘有污垢层后的清洗状况鲜见报道。对此，本文对直接空冷凝汽器蛇形翅片管污垢层清洗进行了数值模拟，分析了翅片管表面具有不同厚度的垢层时，在清洗过程中所受到的压力和剪切应力随时间的变化规律。结果表明：清洗带有不同厚度垢层的翅片管，翅片管表面垢层越薄，就越容易清洗，所需清洗时间越短；翅片管表面垢层受到的压力和剪切应力随垢层厚度的减小而减小，随清洗时间的增加而减小；经计算得出，清洗喷嘴的移动速度为1.1～1.5m/min时可更好的清洗翅片管表面的污垢。
|
| 关 键 词： | 热能工程 空冷凝汽器 蛇形翅片管 污垢 清洗过程 数值模拟 |
| 收稿时间： | 2016-09-30 |
Numerical investigation on fouling cleaning of direct air cooled condenser finned tube |
| |
| WANG Jianjiang,LI Tao,JING Xuehui,WANG Shenglong,SONG He Yu Jiang,LI Ji,ZHANG Siwen. Numerical investigation on fouling cleaning of direct air cooled condenser finned tube[J]. Chemical Industry and Engineering Progress, 2016, 35(Z2): 99-102. DOI: 10.16085/j.issn.1000-6613.2016.s2.016 |
| |
| Authors: | WANG Jianjiang LI Tao JING Xuehui WANG Shenglong SONG He Yu Jiang LI Ji ZHANG Siwen |
| |
| Affiliation: | 1. State Grid Xinjiang Electric Power Company Electric Power Research Institute, Urumqi 830011, Xinjiang, China;2. School of Energy and Power Engineering, Northeast Dianli University, Jilin 132012, Jilin, China |
| |
| Abstract: | Direct air cooled steam condenser finned tube condenser as an important heat exchanger of air cooling unit components.Finned tube directly influences the clean of air cooling unit of efficient heat transfer capability.At present,research on improving the heat transfer capability of finned tube heat exchanger in direct air cooled condenser,at the same time,cleaning condition of the fouling layer are rarely reported.To solve the problem,fouling cleaning process of direct air cooled condenser finned tube was researched by numerical simulation.Finned tube surface was analyzed with different thickness of the filth in the cleaning process of stress and shear stress changing with the time.The results show that:the cleaning filth layer of finned tube with different thickness,the surface filth layer is thin,the easier is to be cleaned,cleaning the shorter the time required.The pressure and shear stress of the filth layer decrease with the decrease of the thickness,and the increase of the cleaning time.As calculated,when cleaning the nozzle's movement speed by 1.1~1.5 m/min can be better clean the dirt on the surface of the finned tube. |
| |
| Keywords: | thermal engineering air cooled condenser serpentine finned tube filth cleaning process numerical simulation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《化工进展》浏览原始摘要信息 |
|
点击此处可从《化工进展》下载全文 |
|
