| 小样纺纱CAD＆CAM系统开发 |
| |
| 引用本文： | 马崇启 潘庆云. 小样纺纱CAD＆CAM系统开发[J]. 纺织学报, 2007, 28(1): 22-24,36 |
| |
| 作者姓名： | 马崇启 潘庆云 |
| |
| 作者单位： | 天津工业大学纺织学院,天津300160 |
| |
| 摘 要： | 鉴于传统小样纺纱设备中存在的一些问题，结合信息管理、自动控制、伺服驱动和变频调速等技术，开发了小样纺纱CAD＆CAM系统。CAD系统包括纱线设计模块、纺纱工艺设计模块和报表打印模块，可对常规纱线和竹节纱进行纱线结构参数设计、纺纱工艺流程设计及各道工序的上机工艺参数设计。CAM系统包括小样梳棉机、并条机和细纱机，采用了基于可编程控制器的数字化控制方案和多电机独立传动的控制技术，RS485通讯总线连接着上位机与小样梳棉机、并条机和细纱机，各机器可以在上位机监控状态下运行，也可以在脱机状态下独立运行。
|
| 关 键 词： | 小样纺纱 数字化 CAD CAM |
| 文章编号： | 0253-9721（2007）01-0022-04 |
| 修稿时间： | 2006-04-272006-07-24 |
Development of sample spinning CAD & CAM system |
| |
| MA Chongqi , PAN Qingyun. Development of sample spinning CAD & CAM system[J]. Journal of Textile Research, 2007, 28(1): 22-24,36 |
| |
| Authors: | MA Chongqi PAN Qingyun |
| |
| Affiliation: | School of Textiles, Tianjin Polytechnic University, Tianjin 300160, China |
| |
| Abstract: | Considering the problems associated with the traditional sample spinning frame,a CAD & CAM system for the sample spinning is developed through integrating technologies of information management,autocontrol,servo driving and variable speed control with frequency conversion.The CAD system,including design module of yarn structural parameters,spinning technique design module and report forms printing module,can design yarn structural parameters for both normal yarn and slubby yarn,spinning process and various parameters in every process.The CAM system,including carding frame,drawing frame and spinning frame,adopts digital control system based on PLC and multiple motors with individual driving technology.All the three machines are connected with host computer by RS485 communication bus,and each machine can run in either online or offline states. |
| |
| Keywords: | sample spinning digitization CAD CAM |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
