| 注塑工艺对聚碳酸酯制品环境应力开裂行为的影响 |
| |
| 引用本文： | 韩健;韩冬雪;刘春太;陈静波;申长雨. 注塑工艺对聚碳酸酯制品环境应力开裂行为的影响[J]. 中国塑料, 2010, 24(4): 76-79. DOI: 10.19491/j.issn.1001-9278.2010.04.016 |
| |
| 作者姓名： | 韩健 韩冬雪 刘春太 陈静波 申长雨 |
| |
| 作者单位： | 郑州大学橡塑模具国家工程研究中心郑州大学橡塑模具国家工程研究中心 |
| |
| 摘 要： | 研究了不同注塑工艺下成型的聚碳酸酯（PC）平板制品的环境应力开裂行为。结果表明：在四氯化碳浸渍下，在制品侧壁位置出现分层开裂；熔体温度升高可以提升PC制品的耐环境应力开裂性；保压压力较大时，制品开裂现象较为明显。在分析分子取向和残余应力与制品环境应力开裂行为关系的基础上，探讨了注射成型工艺对PC注塑制品环境应力开裂行为的影响机理。
|
| 关 键 词： | 聚碳酸酯 环境应力开裂 分子取向 双折射 残余应力 |
| 收稿时间： | 2009-12-31 |
Effect of Injection Molding Process on Environmental Stress Cracking Behavior of Polycarbonate Parts |
| |
| HAN JianHAN DongxueLIU ChuntaiCHEN JingboSHEN Changyu. Effect of Injection Molding Process on Environmental Stress Cracking Behavior of Polycarbonate Parts[J]. China Plastics, 2010, 24(4): 76-79. DOI: 10.19491/j.issn.1001-9278.2010.04.016 |
| |
| Authors: | HAN JianHAN DongxueLIU ChuntaiCHEN JingboSHEN Changyu |
| |
| Abstract: | This work investigates the environment stress cracking behavior of polycarbonate (PC) injection molded plates with different process conditions. When exposed to carbon tetrachloride, crack appeared at the edge surface of the molded parts. Higher injection temperature increases resistance to the environmental stress crack, while higher packing pressure makes the cracking more serious. Additional study was concentrated on the effect of molecular orientation and residual stresses on crack formation of the parts. |
| |
| Keywords: | polycarbonate environment stress cracking molecular orientation birefringence residual stress |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国塑料》浏览原始摘要信息 |
|
点击此处可从《中国塑料》下载全文 |
