首页 | 本学科首页   官方微博 | 高级检索  
     

微弧氧化处理对铝合金耐霉菌腐蚀特性的影响
引用本文:王晓波,杨国华,全风美,法涛,朱生发. 微弧氧化处理对铝合金耐霉菌腐蚀特性的影响[J]. 金属热处理, 2020, 45(5): 90-96. DOI: 10.13251/j.issn.0254-6051.2020.05.017
作者姓名:王晓波  杨国华  全风美  法涛  朱生发
作者单位:中国工程物理研究院 材料研究所, 四川 绵阳 621900
摘    要:在2A12铝合金表面制备了微弧氧化膜层,按照国家军用标准霉菌测试方法对微弧氧化膜层的耐腐蚀性能进行了测试,通过扫描电镜(SEM)、X射线衍射分析(XRD)对铝合金基体及微弧氧化膜层霉菌腐蚀前后的微观结构、相组成进行了表征。结果表明,未经过微弧氧化处理的铝合金表面有少量的霉菌生长,表面产生了一定数量的点蚀坑,长霉等级为1级。经过微弧氧化处理试样表面未发现霉菌生长,长霉等级为0级。微弧氧化处理可以有效提高铝合金表面耐霉菌腐蚀性能,扩大其应用范围。

关 键 词:铝合金  微弧氧化  霉菌  耐腐蚀  
收稿时间:2019-11-05

Effect of plasma electrolytic oxidation on mould corrosion resistance of aluminum alloy
Wang Xiaobo,Yang Guohua,Quan Fengmei,Fa Tao,Zhu Shengfa. Effect of plasma electrolytic oxidation on mould corrosion resistance of aluminum alloy[J]. Heat Treatment of Metals, 2020, 45(5): 90-96. DOI: 10.13251/j.issn.0254-6051.2020.05.017
Authors:Wang Xiaobo  Yang Guohua  Quan Fengmei  Fa Tao  Zhu Shengfa
Affiliation:Institute of Materials, China Academy of Engineering Physics, Mianyang Sichuan 621900, China
Abstract:Plasma electrolytic oxidation (PEO) coatings were fabricated on the 2A12 aluminum alloy and mould corrosion resistance of the PEO coating was tested. SEM and XRD were employed to analyze the morphology, composition and phase component of the coatings. The results show that the mould growth behavior is observed on the surface of aluminum alloy under mould condition. Pitting corrosion occurs on the metal surface and the corrosion degree is grade I, while no mould growth behavior is observed on the PEO coating surface and the corrosion degree is grade 0. PEO treatment can improve the mould corrosion resistance of the aluminum alloy and expand their application.
Keywords:aluminum alloy  plasma electrolytic oxidation  mould  corrosion resistance  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《金属热处理》浏览原始摘要信息
点击此处可从《金属热处理》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号