| 铝件浸液式非标淬火设备的研制 |
| |
| 引用本文： | 罗平,石一磬,李贤君,张文良,周彤,孙萌. 铝件浸液式非标淬火设备的研制[J]. 金属热处理, 2020, 45(4): 236-241. DOI: 10.13251/j.issn.0254-6051.2020.04.049 |
| |
| 作者姓名： | 罗平 石一磬 李贤君 张文良 周彤 孙萌 |
| |
| 作者单位： | 北京机电研究所有限公司, 北京 100083 |
| |
| 基金项目： | "高档数控机床与基础制造装备"国家科技重大专项 |
| |
| 摘 要： | 通过介绍铝件淬火工艺基本原则、铝件在水介质中浸液式淬火可能出现的问题以及换热系数与淬火介质温度和流速的关系,为铝件浸液式淬火设备的非标设计提供科学依据。根据本团队研制的非标铝件浸液式淬火设备工程应用中遴选典型案例,分析其在设计和产业化过程中遇到的一些关键问题,阐明了淬火时保证铝件预期性能的前提下减少畸变的解决方法。
|
| 关 键 词： | 铝件 变形 非标 浸液式淬火设备 工程应用 |
| 收稿时间： | 2020-01-20 |
Development of non-standard immersion quenching equipment for aluminum parts |
| |
| Luo Ping,Shi Yiqing,Li Xianjun,Zhang Wenliang,Zhou Tong,Sun Meng. Development of non-standard immersion quenching equipment for aluminum parts[J]. Heat Treatment of Metals, 2020, 45(4): 236-241. DOI: 10.13251/j.issn.0254-6051.2020.04.049 |
| |
| Authors: | Luo Ping Shi Yiqing Li Xianjun Zhang Wenliang Zhou Tong Sun Meng |
| |
| Affiliation: | Beijing Research Institute of Mechanical & Electrical Technology Ltd., Beijing 100083, China |
| |
| Abstract: | The principles of quenching process of aluminum parts, potential problems of aluminum parts in the quenching process and the relationship between heat transfer coefficient and temperature as well as the cooling velocity of quenchant were introduced. And a scientific basis of immersion quenching equipment of aluminum parts for customization was provided. Finally, several typical engineering examples are analyzed based on some critical issues during the design and industrialization, which are selected from dozens of cases of immersion quenching equipment of aluminum parts. Therefore, the solutions to reduce distortion under the premise of ensuring the expected performance of aluminum parts during quenching are clarified. |
| |
| Keywords: | aluminum parts deformation non-standard immersion quenching equipment application in engineering |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载免费的PDF全文 |
|
