| 喷射成形Al-Zn-Mg-Cu合金挤压态的组织和力学性能 |
| |
| 引用本文： | 潘海成,陈业高,孙肖霞,范钧. 喷射成形Al-Zn-Mg-Cu合金挤压态的组织和力学性能[J]. 金属热处理, 2020, 45(7): 173-176. DOI: 10.13251/j.issn.0254-6051.2020.07.035 |
| |
| 作者姓名： | 潘海成 陈业高 孙肖霞 范钧 |
| |
| 作者单位： | 宿迁学院 机电工程学院, 江苏 宿迁 223800 |
| |
| 基金项目： | 宿迁市科技计划;江苏高校品牌专业建设工程资助项目 |
| |
| 摘 要： | 研究了利用喷射成形辅以挤压制备Al-5.72Zn-2.36Mg-1.66Cu合金后优化的组织结构特征和力学性能。结果表明,合金基体组织均匀细化,晶粒形貌趋于圆整,平均晶粒大小达到10 μm左右。当合金的冷却条件通过快速凝固技术改变时,会产生不同程度的固溶强化效果和第二相弥散强化效果,从而改善了合金的整体性能。合金的屈服强度和抗拉强度分别平均提高了20%左右,且伸长率也略有提高。
|
| 关 键 词： | Al-Zn-Mg-Cu铝合金 喷射成形 快速凝固 组织 力学性能 |
| 收稿时间： | 2020-01-26 |
Microstructure and mechanical properties of extrusion state Al-Zn-Mg-Cu alloy after spray forming |
| |
| Pan Haicheng,Chen Yegao,Sun Xiaoxia,Fan Jun. Microstructure and mechanical properties of extrusion state Al-Zn-Mg-Cu alloy after spray forming[J]. Heat Treatment of Metals, 2020, 45(7): 173-176. DOI: 10.13251/j.issn.0254-6051.2020.07.035 |
| |
| Authors: | Pan Haicheng Chen Yegao Sun Xiaoxia Fan Jun |
| |
| Affiliation: | School of Mechanical and Electrical Engineering, Suqian College, Suqian Jiangsu 223800, China |
| |
| Abstract: | Optimized microstructure characteristics and the mechanical properties of the Al-5.72Zn-2.36Mg-1.66Cu aluminium alloy prepared by spray forming and continuous extrusion were studied. The results show that the microstructure of the alloy matrix is uniformly refined and the morphology of the grains tends to be rounded. And the average grain size of the alloy is about 10 μm. The different effects of the solid solution strengthening and second-phase dispersion strengthening will be generated when the cooling condition of the alloy is changed by the rapid solidification. Thus,the overall properties of the alloy are also improved by spraying. The yield strength and tensile strength of the alloy are increased by about 20% on average, and the elongation is increased slightly. |
| |
| Keywords: | Al-Zn-Mg-Cu aluminum alloy spray forming rapid solidification microstructure mechanical properties |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《金属热处理》浏览原始摘要信息 |
|
点击此处可从《金属热处理》下载免费的PDF全文 |
