| 航空发动机整体叶环叶片裂纹分析 |
| |
| 引用本文： | 赵世炜,孟令琪,卜嘉利,邱丰,刘博志. 航空发动机整体叶环叶片裂纹分析[J]. 失效分析与预防, 2022, 17(6): 410-414. DOI: 10.3969/j.issn.1673-6214.2022.06.010 |
| |
| 作者姓名： | 赵世炜 孟令琪 卜嘉利 邱丰 刘博志 |
| |
| 作者单位： | 中国航发沈阳发动机研究所，沈阳 110015 |
| |
| 摘 要： | 经锻造热处理和热等静压工艺处理后的整体叶环叶片在振动疲劳试验中出现裂纹，通过宏观检查、断口宏微观分析、材质分析、力学性能试验和有限元应力模拟等手段，对叶片的裂纹性质和萌生原因进行分析与研究，并提出改进建议。结果表明：整体叶环叶片裂纹性质为高周疲劳，疲劳裂纹起源于叶片叶背侧表面最大应力区；整体叶环叶片在热等静压工艺处理后存在平直晶界连续α膜，抗疲劳性能明显降低，导致疲劳裂纹过早萌生。
|
| 关 键 词： | 航空发动机 整体叶环叶片 振动疲劳 TC17 热等静压 |
| 收稿时间： | 2022-08-01 |
Failure Analysis of Vibration Fatigue Crack on the Integral Ring Blade of Aeroengine |
| |
| ZHAO Shi-wei,MENG Ling-qi,BU Jia-li,QIU Feng,LIU Bo-zhi. Failure Analysis of Vibration Fatigue Crack on the Integral Ring Blade of Aeroengine[J]. Failure Analysis and Prevention, 2022, 17(6): 410-414. DOI: 10.3969/j.issn.1673-6214.2022.06.010 |
| |
| Authors: | ZHAO Shi-wei MENG Ling-qi BU Jia-li QIU Feng LIU Bo-zhi |
| |
| Abstract: | Aiming at the cracks in the vibration fatigue test of the integral ring blade after the forging heat treatment and hot isostatic pressing process, this paper uses macro inspection, fracture macro and micro analysis, material analysis, mechanical performance test and finite element stress simulation to analyze and study the crack properties and initiation causes of the blade, and put forward suggestions for improvement. The results show that the crack property of the integral ring blade is high cycle fatigue fracture. The fatigue crack originated from the maximum stress area on the back surface of the blade. Furthermore, there was a continuous α film with straight grain boundaries, and the fatigue resistance was significantly reduced, resulting in the premature initiation of fatigue crack. |
| |
| Keywords: | |
|
| 点击此处可从《失效分析与预防》浏览原始摘要信息 |
|
点击此处可从《失效分析与预防》下载免费的PDF全文 |
|
