| 板坯连铸结晶器钢液流场的数学模拟 |
| |
| 引用本文： | 孙于萍,李杰,乐可襄,周兰聚. 板坯连铸结晶器钢液流场的数学模拟[J]. 特殊钢, 2005, 26(2): 12-15 |
| |
| 作者姓名： | 孙于萍 李杰 乐可襄 周兰聚 |
| |
| 作者单位： | 1、安徽工业大学，马鞍山 243002；2、济钢集团公司，济南 250101； |
| |
| 摘 要： | 用Fluent流体力学的三维计算软件 ,运用湍流脉动动能κ方程和湍流脉动动能散耗率ε方程的κ-ε双方程模型在给定的数值计算条件下 ,对板坯连铸结晶器内钢液的流场进行了模拟研究 ,结晶器钢液流场的基本特征为 :在结晶器出口方向存在一个速度较快的水平流 ,其冲击到结晶器壁时形成回流 ,把结晶器内钢液分割成上下两个回流区。通过数值计算得出 ,1250 mm × 200 mm板坯结晶器水口合适插入深度为 175mm ,出口倾角 16°～18°和合适拉坯速度为 10～12m/min。
|
| 关 键 词： | 板坯连铸 结晶器 流场 数学模拟 |
| 收稿时间： | 2004-10-18 |
Numerical Simulation on Fluid Field in Mould for Slab Concasting |
| |
| Sun Yuping,Li Jie,Yue Kexiang,Zhou Lanju. Numerical Simulation on Fluid Field in Mould for Slab Concasting[J]. Special Steel, 2005, 26(2): 12-15 |
| |
| Authors: | Sun Yuping Li Jie Yue Kexiang Zhou Lanju |
| |
| Affiliation: | 1.Anhui University of Technology, Ma'anshan 243002;2.Jinan Iron and Steel Group Co, Jinan 250101; |
| |
| Abstract: | The fluid field in mould for slab concasting has been simulated using K-e double equation model i.e. the turbulent flow pulse kinetic energy k equation and the turbulent flow pulse kinetic scattering loss rate e equation in given numerical calculation conditions by three dimensional mathematical software Fluent. The basic characteristic of fluid field in mould was that there was a horizontal flow at exit of mould, which formed return flow as it impacted the wall of mould to divide the fluid in mould into up return flow and down flow. It is obtained by calculation that the immersion depth of nozzle for mould of 1250 mm x 200 mm slab 175 mm, the exit angle 16° ~ 18° and the casting speed 1.0 ~ 1.2 m/min are available for slab casting. |
| |
| Keywords: | Slab Concasting Mould Flow field Numerical Simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
|
