| 不同分子量木质素磺酸钠染料分散剂的结构及性能 |
| |
| 引用本文： | 杨东杰,李会景,白孟仙,邱学青. 不同分子量木质素磺酸钠染料分散剂的结构及性能[J]. 化工学报, 2014, 65(10): 4138-4144. DOI: 10.3969/j.issn.0438-1157.2014.10.051 |
| |
| 作者姓名： | 杨东杰 李会景 白孟仙 邱学青 |
| |
| 作者单位： | 华南理工大学化学与化工学院, 广东 广州 510640 |
| |
| 基金项目： | 国家国际科技合作专项项目(2013DFA41670)；中央高校基本科研业务费专项资金(2014ZP0003)；国家自然科学基金项目(21176096)。 |
| |
| 摘 要： | 采用超滤方法对木质素磺酸钠进行分离得到3种不同分子量级份。采用凝胶渗透色谱、紫外光谱、电位滴定等方法研究各级份的结构特征及其对分散染料性能的影响。结果表明，随着分子量的增加，木质素磺酸钠颜色加深、纯度提高，分子结构中愈创木基含量增多，酚羟基、磺酸基和羧基的含量降低；高分子量木质素磺酸钠对分散染料具有更优的分散性和高温稳定性，染料上染率也随其分子量的增大而增加，且当木质素磺酸钠浓度较高时，分子量增大，对纤维沾污减弱。木质素磺酸钠对染料的还原破坏作用与分子量和酚羟基含量有关，采用截留分子量大于2.5×103的膜提纯的木质素磺酸钠级份对染料还原性最低，还原水解率由未提纯时的26.0%降为6.9%，且该级份木质素磺酸钠具有最优的匀染性能。
|
| 关 键 词： | 木质素磺酸钠 超滤 分离 染料分散剂 分子量 表面活性剂 |
| 收稿时间： | 2014-02-10 |
| 修稿时间： | 2014-05-30 |
Structure and performance of dye dispersant sodium lignosulfonate with different molecular weight |
| |
| YANG Dongjie,LI Huijing,BAI Mengxian,QIU Xueqing. Structure and performance of dye dispersant sodium lignosulfonate with different molecular weight[J]. Journal of Chemical Industry and Engineering(China), 2014, 65(10): 4138-4144. DOI: 10.3969/j.issn.0438-1157.2014.10.051 |
| |
| Authors: | YANG Dongjie LI Huijing BAI Mengxian QIU Xueqing |
| |
| Affiliation: | College of Chemistry and Chemical Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China |
| |
| Abstract: | Three purified sodium lignosulfonate (SL) samples with various molecular weights were prepared by fractionation using ultrafiltration.The structural characteristics of SL samples and its effect on performance of dye are investigated by means of gel permeation chromatography, ultraviolet spectrophotometry, electrolytic titration and high temperature dying process. The results show that, with increase of molecular weight, the color of SL becomes darker, its purity increases, and the content of guaiacyl increases while phenolic hydroxyl, carboxyl and sulfonic decrease. The SL with high molecular weight is of good dispersibility and high temperature stability for dispersing dyestuff, and the dyeing rate of dyestuff increases also with increase of SL molecular weight. The staining of SL for fiber could be weakened when its molecular weight is larger and its concentration is higher. In addition, the reduction destruction of SL for dyestuff depends on molecular weights and the content of phenolic hydrophilic group. The SL fraction with molecular weight above 2.5?103 can make dyestuff the most excellent levelling property and the lowest reduction effect, the reduction and hydrolysis rate reduce from 26.0% of unpurified SL to 6.9%. |
| |
| Keywords: | sodium lignosulfonate ultrafiltration separation dye dispersant molecular weight surfactant |
| 本文献已被 万方数据 等数据库收录！ |
| 点击此处可从《化工学报》浏览原始摘要信息 |
|
点击此处可从《化工学报》下载免费的PDF全文 |
