| 飞机刹车盘钢夹断裂分析 |
| |
| 引用本文： | 袁建宇,逄锦程,韩露. 飞机刹车盘钢夹断裂分析[J]. 失效分析与预防, 2017, 12(2): 116-120. DOI: 10.3969/j.issn.1673-6214.2017.02.009 |
| |
| 作者姓名： | 袁建宇 逄锦程 韩露 |
| |
| 作者单位： | 航天材料及工艺研究所, 北京 100076 |
| |
| 摘 要： | 飞机刹车盘钢夹在使用过程中发生断裂。利用体视显微镜、金相显微镜、扫描电子显微镜、能谱仪等手段对发生断裂的钢夹的断口宏观微观形貌、组织、微区成分和显微硬度进行分析。结果表明:钢夹的断裂模式为疲劳断裂；断裂原因与钢夹材料硬度明显低于设计要求，显微组织中存在大量条状氧化物夹杂（大于3级），导致材料强度降低、承载能力不足有关；建议严格控制钢夹热处理工艺，原材料缺陷以及零件装配公差。
|
| 关 键 词： | 炭/炭刹车盘钢夹 疲劳断裂 硬度 氧化物夹杂 装配公差 |
| 收稿时间： | 2017-01-05 |
Failure Analysis of Brake Plate Clamps of Plane |
| |
| YUAN Jian-yu,PANG Jin-cheng,HAN Lu. Failure Analysis of Brake Plate Clamps of Plane[J]. Failure Analysis and Prevention, 2017, 12(2): 116-120. DOI: 10.3969/j.issn.1673-6214.2017.02.009 |
| |
| Authors: | YUAN Jian-yu PANG Jin-cheng HAN Lu |
| |
| Abstract: | The carbon/carbon brake plate clamp of a plane fractured during service.Fracture morphology, microstructure, micro-area composition and micro-hardness were analyzed by means of stereo microscopy, metallographic microscopy, scanning electron microscopy and energy dispersive spectroscopy.The analysis results indicate that the failure mode is fatigue fracture, which is related to the insufficient bearing capacity, resulting from the significantly lower material hardness and lots of band-like oxide inclusions in the microstructure.It is recommended that the material heat treatment process, raw material defects and part assembling tolerance should be strictly controlled. |
| |
| Keywords: | carbon/carbon brake plate clamp fatigue fracture hardness oxide inclusion assembling tolerance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《失效分析与预防》浏览原始摘要信息 |
|
点击此处可从《失效分析与预防》下载免费的PDF全文 |
